AIB6420 - Bathroom PHILIPS - Free user manual and instructions
Find the device manual for free AIB6420 PHILIPS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Bathroom extractor fan |
| Brand | Philips |
| Model | AIB6420 |
| Mounting | Wall or ceiling |
| Duct diameter | 100 mm |
| Airflow capacity | 120 m3/h |
| Noise level | 32 dBA |
| Power supply | 220-240 V, 50 Hz |
| Power consumption | 10 W |
| Control | Humidity sensor, adjustable timer, pull cord |
| Backdraft shutter | Automatic non-return flap |
| Protection rating | IPX4 |
| Dimensions (H x W x D) | 150 x 150 x 113 mm |
| Weight | 0.8 kg |
| Operating temperature | 0 to 50 deg C |
| Installation | Sealed duct connection |
| Maintenance | Clean grille and fan blades |
| Spare parts | Grille, filter, motor |
| Certifications | CE marked |
| Included accessories | Mounting screws, connector |
Frequently Asked Questions - AIB6420 PHILIPS
How do I install the Philips AIB6420 bathroom fan?
For proper installation, switch off the power, then fix the fan to a wall or ceiling using the included screws. Connect the ducting to the 100 mm spigot and wire the fan to a 220-240 V supply. Always follow the wiring diagram in the manual.
How does the built-in humidity sensor work?
The humidity sensor automatically switches the fan on when moisture levels rise above a set threshold, making it ideal for bathrooms. It continues running until the air is sufficiently dry.
Can I adjust the timer delay?
Yes, the fan features an adjustable timer that can be set between 2 and 15 minutes. Use the small dial on the side of the unit to set your desired run-on time after use.
How should I clean the fan?
First disconnect the power. Wipe the external grille with a damp cloth and use a soft brush to remove dust from the fan blades. Do not use corrosive cleaners or submerge the motor in water.
What should I do if the fan becomes noisy?
Excessive noise usually indicates a build-up of dust or a loose mounting. Clean the blades and check that all screws are tightened. If the noise persists, the motor may need replacement.
Is it safe to install above the bathtub?
The fan has an IPX4 rating, meaning it is splash-proof and suitable for installation in zone 1 above a bath or shower, provided it is not directly in the water jet.
What is the maximum airflow of this fan?
The fan delivers up to 120 m3/h, which is suitable for bathrooms up to approximately 15 m2. This ensures effective air extraction and condensation control.
How do I replace the filter?
If a filter is installed, open the front grille and slide out the old filter. Insert a new Philips replacement filter and snap the grille back into place. Check the manual for part numbers.
Why doesn't my fan turn on?
Check that the power supply is connected and the circuit breaker is not tripped. Ensure the humidity sensor is not set too low and that any manual switch is in the 'on' position. If it still doesn't work, consult a qualified electrician.
Can this fan be controlled from a light switch?
Yes, the AIB6420 can be wired to a light switch for manual operation. In this setup, the fan will start when the light is switched on and stop (or continue with a timer) after the light is turned off.
User questions about AIB6420 PHILIPS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Bathroom in PDF format for free! Find your manual AIB6420 - PHILIPS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AIB6420 by PHILIPS.
USER MANUAL AIB6420 PHILIPS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PHILIPS
Model : AIB6420
Category : Bathroom