A222C6WHW - Monitor PHILIPS - Free user manual and instructions
Find the device manual for free A222C6WHW PHILIPS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED-backlit LCD monitor |
| Brand | Philips |
| Model | A222C6WHW |
| Screen Size | 21.5 inches (54.6 cm) |
| Resolution | 1920 x 1080 pixels (Full HD) |
| Aspect Ratio | 16:9 |
| Refresh Rate | 60 Hz |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Response Time | 5 ms |
| Viewing Angle | 170° Horizontal, 160° Vertical |
| Display Colors | 16.7 million |
| Connectivity Ports | VGA x1, DVI x1 |
| Power Consumption | 22 W (typical) |
| Standby Power | 0.5 W |
| Tilt Adjustment | -5° to 20° |
| VESA Mount | 100 x 100 mm |
| Color | White |
| Weight | 3.2 kg (with stand) |
| Dimensions | 509 x 396 x 220 mm (with stand) |
| Included Accessories | VGA cable, power cable |
| Additional Features | SmartContrast, SmartImage presets, Flicker-free technology, LowBlue mode |
Frequently Asked Questions - A222C6WHW PHILIPS
How do I connect my computer to the Philips A222C6WHW monitor?
Use the VGA or DVI cable supplied with the monitor. Connect one end to the monitor's VGA or DVI port and the other to your computer's corresponding graphics output. Then press the power button on both devices. If no image appears, check that the correct input source is selected via the monitor's on-screen menu (button "Input").
What is the recommended resolution for this monitor?
The native resolution is 1920 x 1080 pixels. For best image quality, set your computer's display settings to this resolution and a refresh rate of 60 Hz. The monitor will automatically scale lower resolutions, but text may appear less sharp.
How do I adjust the brightness and contrast settings?
Press the OK button on the bezel to open the on-screen display menu. Use the arrow buttons to navigate to "Picture" or "Brightness/Contrast" and adjust the sliders with the +/- buttons. The settings are saved automatically and can be reset to factory defaults via the "Setup" menu.
The monitor displays "No Signal" or goes black. What should I do?
First, verify that the monitor is turned on and the power LED is lit. Check all cable connections (VGA/DVI). If using an adapter, ensure it is correctly wired. Then press the "Input" button to cycle through available sources. If the problem persists, test the monitor with another computer or laptop to isolate the issue.
Can I mount this monitor on a wall?
Yes, the monitor has a VESA 100 x 100 mm mounting hole pattern. Remove the base detach and attach a compatible VESA wall bracket using the screws provided with the bracket. Make sure the wall can support the weight of the monitor (about 3 kg).
Is the Philips A222C6WHW good for gaming?
With a 5 ms response time and a 60 Hz refresh rate, it is suitable for casual gaming. Competitive gamers looking for faster refresh rates or adaptive sync may prefer a dedicated gaming monitor. To reduce input lag, enable "Game" mode in the picture settings.
How should I clean the screen without damaging it?
Always unplug the monitor from the power outlet before cleaning. Use a soft, dry microfibre cloth to wipe the screen gently. For stubborn stains, slightly dampen the cloth with distilled water. Do not use alcohol, ammonia, or abrasive cleaners, and never spray liquid directly on the screen.
Does this monitor reduce eye strain?
Yes, it features Flicker-free technology that reduces backlight flicker and a LowBlue mode that filters harmful blue light. These features help minimize eye fatigue during long work sessions. You can activate LowBlue mode via the on-screen menu.
Can I connect two devices, such as a desktop and a laptop, at the same time?
The monitor has VGA and DVI inputs, but only one can be displayed at a time. Connect both devices and switch between them using the "Input" button on the monitor. This allows you to alternate between sources without unplugging cables.
Does the monitor have built-in speakers?
No, the Philips A222C6WHW does not include integrated speakers. For audio, connect external speakers or headphones to your computer, or use an HDMI-to-DVI adapter with an audio cable if your graphics card supports it (note that the monitor itself has no audio output).
User questions about A222C6WHW PHILIPS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Monitor in PDF format for free! Find your manual A222C6WHW - PHILIPS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. A222C6WHW by PHILIPS.
USER MANUAL A222C6WHW PHILIPS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PHILIPS
Model : A222C6WHW
Category : Monitor