SR-T5 - Loudspeaker TOA - Free user manual and instructions
Find the device manual for free SR-T5 TOA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 2-way bass-reflex loudspeaker |
| Brand | TOA |
| Model | SR-T5 |
| Woofer | 5 inch (12.7 cm) cone driver |
| Tweeter | 1 inch (2.5 cm) dome tweeter |
| Rated Impedance | 8 ohms |
| Power Capacity | 15 W continuous, 30 W peak |
| Frequency Range | 70 Hz - 20 kHz |
| Sensitivity | 87 dB (1 W, 1 m) |
| Input Terminals | Screw terminals for bare wire |
| Enclosure | Bass-reflex ported cabinet |
| Dimensions | 180 x 300 x 160 mm |
| Net Weight | 3.1 kg |
| Finish | Textured black vinyl |
| Mounting | Keyhole slot and 1/4 inch stand mount |
| Cleaning and Maintenance | Wipe with a soft dry cloth; clean grille with a vacuum |
| Safety | Do not expose to rain, moisture, or excessive heat |
| Spare Parts and Service | Contact an authorized TOA service center for replacement drivers |
| Included Items | Loudspeaker and user manual |
Frequently Asked Questions - SR-T5 TOA
What is the rated impedance of the TOA SR-T5 loudspeaker?
The rated impedance is 8 ohms, which is compatible with most standard home amplifiers and PA systems.
What power amplifier can I use with the SR-T5?
Use an amplifier that delivers between 15 and 30 watts per channel at 8 ohms. A higher power amplifier can be used with care, but avoid prolonged clipping or distortion.
How do I connect the speaker wires to the SR-T5?
Unscrew the terminal caps, insert the stripped bare wire into the holes, then retighten the caps. Make sure the positive terminal matches the red output and the negative matches the black output.
Can the TOA SR-T5 be used outdoors?
The SR-T5 is designed for indoor installation. If outdoor use is unavoidable, it must be installed under an eave or in a weather-protected enclosure and never exposed to direct rain or moisture.
What is the best way to clean the SR-T5 cabinet?
Use a soft dry cloth to wipe the cabinet. For the grille, gently vacuum with a brush attachment. Do not use liquid cleaners, solvents, or water-based sprays.
Can I mount the SR-T5 on a wall?
Yes, the cabinet has a keyhole slot for wall hanging. Use a screw rated for at least 10 kg, anchored securely into a wall stud or masonry plug.
What cable should I use for the SR-T5?
Use a two-conductor speaker cable with a cross-section of at least 0.75 mm² (18 AWG) for runs up to 10 m. For longer distances, use 1.5 mm² (16 AWG) or larger.
Why does my SR-T5 produce no sound?
Check the amplifier output, cable connections, and speaker terminals. Verify that the wires are not shorted and that the amplifier is driving the correct left or right channel. Also confirm that the speaker is not accidentally muted.
Can I replace the woofers or tweeters myself?
Replacement of drivers is possible for qualified technicians. Contact an authorized TOA service center to obtain genuine spare parts and ensure correct installation.
Is the SR-T5 suitable for use with a 70V/100V line distributed audio system?
The standard SR-T5 is an 8 ohm speaker and does not include a step-down transformer for high-voltage lines. To use it on a 70V/100V system, you need an external line transformer rated at the appropriate wattage.
User questions about SR-T5 TOA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual SR-T5 - TOA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SR-T5 by TOA.
USER MANUAL SR-T5 TOA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TOA
Model : SR-T5
Category : Loudspeaker