SR-H2L - Loudspeaker TOA - Free user manual and instructions
Find the device manual for free SR-H2L TOA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Loudspeaker |
| Brand | TOA |
| Model | SR-H2L |
| Speaker Type | 2-way passive loudspeaker |
| Impedance | 8 ohms |
| Power Handling | 50 W (continuous) / 100 W (program) |
| Frequency Response | 60 Hz - 20 kHz |
| Sensitivity | 90 dB SPL (1 W / 1 m) |
| Driver Complement | 1 x 6.5 inch woofer, 1 x 1 inch tweeter |
| Input Connection | Spring-loaded terminal |
| Dimensions (H x W x D) | 350 x 200 x 200 mm |
| Weight | 3.5 kg |
| Enclosure Material | High-impact ABS plastic |
| Mounting | Included wall-mount bracket |
| Recommended Amplifier Power | 60 W - 120 W at 8 ohms |
| Protection Rating | IP24 rated (splashproof) |
| Operating Temperature | -10 °C to 50 °C |
| Main Functions | Sound reinforcement for small rooms, PA announcements |
| Cleaning and Maintenance | Wipe with a soft dry cloth; avoid solvents |
| Safety Precautions | Install securely; keep away from water and heat |
| Spare Parts | Replacement drivers and crossovers available from service centers |
| General Information | Designed for indoor and covered outdoor use |
Frequently Asked Questions - SR-H2L TOA
How do I connect the TOA SR-H2L to an amplifier?
Connect the speaker to the amplifier using high-quality loudspeaker cable. The SR-H2L uses spring-loaded terminals accepting bare wire or 4 mm banana plugs. Ensure the impedance matches (8 ohms).
What is the impedance of the SR-H2L speaker?
The nominal impedance is 8 ohms, making it suitable for most home and small PA amplifiers.
Can I use the SR-H2L outdoors?
With an IP24 rating, it is splashproof and can be used in covered outdoor locations. Avoid direct rain and continuous moisture.
What amplifier power is recommended?
The recommended amplifier power is 60 W to 120 W per channel at 8 ohms, and the speaker can handle 100 W program power.
How do I mount the speaker on a wall?
Use the included wall-mount bracket. Align the bracket, mark the holes, drill and fix with screws (not provided). Attach the speaker securely with the supplied hardware.
What type of speaker cable should I use?
Use a two-conductor speaker wire with a cross-section of at least 1.5 mm² for distances up to 10 meters. For longer runs, thicker gauge is recommended.
How do I clean the SR-H2L?
Wipe the cabinet with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners, as they may damage the finish and drivers.
What should I do if there is no sound from the speaker?
Check the amplifier connection, verify the input selector, and ensure the speaker cable is firmly connected. Also test with another cable and confirm the amplifier is operative.
Does the SR-H2L work with 100V line systems?
No, the SR-H2L is a low-impedance speaker (8 ohms) and is not designed for 100V line systems. Use a suitable amplifier or a line-matching transformer.
How can I prevent damage to the speaker?
Avoid overpowering the speaker, especially with distorted signals. Keep the speaker away from moisture and excessive heat. Also ensure the speaker is not dropped or hit, as that can damage the voice coil.
User questions about SR-H2L TOA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual SR-H2L - TOA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SR-H2L by TOA.
USER MANUAL SR-H2L TOA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TOA
Model : SR-H2L
Category : Loudspeaker