DSFE 1B19 - Dishwasher INDESIT - Free user manual and instructions
Find the device manual for free DSFE 1B19 INDESIT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Indesit |
| Model Number | DSFE 1B19 |
| Product Type | Freestanding dishwasher |
| Installation Type | Freestanding |
| Capacity | 13 place settings |
| Width | 600 mm |
| Depth | 600 mm |
| Height | 850 mm |
| Weight | 50 kg |
| Energy Efficiency Class | A+ |
| Annual Energy Consumption | 290 kWh/year |
| Voltage / Frequency | 220-240 V / 50 Hz |
| Rated Power | 1900 W |
| Water Consumption per Cycle | 9.5 litres |
| Noise Level | 49 dB(A) |
| Number of Wash Programs | 5 |
| Wash Programs | Eco, Intensive, Rapid 30', Glass, Soak |
| Half Load Option | Yes |
| Delay Start Timer | 1-24 hours |
| Adjustable Upper Basket | Yes |
| Rinse Aid Indicator | Yes |
| Salt Indicator | Yes |
| Child Lock | Yes |
| Spare Parts Availability | Via Indesit authorized service |
| Recommended Maintenance | Clean filters and spray arms regularly |
Frequently Asked Questions - DSFE 1B19 INDESIT
How do I load dishes correctly?
Place large items on the bottom rack, cups and glasses on the top rack, and ensure all dirty surfaces face the spray arms. Avoid overlapping items to ensure water reaches every piece.
What is the best program for everyday use?
The Eco program is ideal for normally soiled dishes and uses less energy and water. For heavily soiled pots and pans, use Intensive.
How do I add salt and rinse aid?
Add dishwasher salt to the softener unit at the bottom of the tub until full, and fill the rinse aid dispenser on the door. Adjust the dosage according to water hardness.
How do I clean the spray arms?
Remove the spray arms by loosening the nut or unlocking the mechanism, rinse them under running water, and clear any blocked nozzles with a thin wire.
Why is there water left in the bottom of the dishwasher?
A small amount of water in the bottom after a cycle is normal. If it is excessive, check the filter and the drain hose for blockages, and ensure the drain pump is not obstructed.
What should I do if the dishwasher won't start?
Check that the door is fully closed, the water tap is open, and the machine is plugged in. Press the Start button again or cancel and re-start the program.
How do I cancel a running program?
Open the door and press the Start/Reset button for approximately 3 seconds. Wait for the dishwasher to drain, then close the door to start a new cycle.
Is it normal to have residue or films on dishes?
This usually indicates a lack of rinse aid or too little detergent. Check the softener setting and ensure the water temperature is high enough for the selected program.
How can I improve drying performance?
Use a rinse aid to enhance water sheeting, select a program with a hotter final rinse, and leave the door ajar for a few minutes after the cycle ends.
How often should I run a maintenance cycle?
Run an empty cycle with a dishwasher cleaner every 1-2 months to remove grease, limescale, and odor-causing bacteria. Also clean the door seals and filters regularly.
User questions about DSFE 1B19 INDESIT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual DSFE 1B19 - INDESIT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DSFE 1B19 by INDESIT.