OMX-3GSDI-FIBER - Receiver Ocean Matrix - Free user manual and instructions
Find the device manual for free OMX-3GSDI-FIBER Ocean Matrix in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 3G-SDI Fiber Optic Receiver |
| Brand | Ocean Matrix |
| Model | OMX-3GSDI-FIBER |
| Video Input | 1x LC fiber optic |
| Video Output | 1x 3G-SDI BNC connector |
| Supported Standards | SMPTE ST 424, ST 292, ST 259 |
| Data Rate | Up to 2.97 Gbps |
| Fiber Compatibility | Single-mode and multimode fiber |
| Transmission Distance | Up to 10 km (single-mode), up to 300 m (multimode) |
| Connectors | LC (fiber in), BNC (SDI out) |
| Power Supply | 5V DC, 2A (included adapter) |
| Dimensions (W x H x D) | 100 x 25 x 60 mm |
| Weight | 200 g |
| Operating Temperature | 0°C to 50°C |
| Maintenance | Clean fiber connectors with a lint-free cloth and avoid bending the fiber cable sharply. |
| Safety | Use only the provided power adapter; do not expose to moisture or heat sources. |
| Spare Parts | Replacement power adapters and fiber cables are available from Ocean Matrix. |
| Repairability | No user-serviceable parts. Contact Ocean Matrix support for service. |
| Application | Extends SDI signals over long distances in broadcast and professional AV environments. |
| Included Accessories | Power adapter, mounting brackets, user manual. |
Frequently Asked Questions - OMX-3GSDI-FIBER Ocean Matrix
What is the OMX-3GSDI-FIBER?
It is an Ocean Matrix receiver that converts fiber optic signals back to 3G-SDI video. It works with compatible transmitters to extend SDI over long distances.
Does this receiver support 4K?
The device supports up to 3G-SDI which handles up to 1080p60. It does not support 4K or 12G-SDI.
What fiber types are compatible?
It accepts both single-mode and multimode fiber using LC connectors. Single-mode allows longer distances (up to 10 km), while multimode is for shorter runs.
How do I connect the receiver?
Connect an LC fiber cable from the transmitter to the fiber input, then connect your SDI display or switcher to the BNC output. Power the unit with the included 5V DC adapter.
What is the maximum distance for the signal?
With single-mode fiber, you can transmit up to 10 km. With multimode fiber, the distance is around 300 meters. Actual distance depends on fiber quality and signal rate.
Does it require any software or drivers?
No, it is a plug-and-play device. Once connected and powered, it instantly converts the optical signal to electrical SDI.
Can I use it with non-Ocean Matrix transmitters?
Yes, as long as the transmitter outputs a standard fiber optic SDI signal and uses the same wavelength (typically 1310nm or 1550nm) and connector type.
How do I clean the fiber connectors?
Use a lint-free cloth or a specialized fiber cleaning pen. Make sure the device is powered off and never touch the end face with your fingers.
Is it rack-mountable?
No, it is a compact standalone unit. It comes with mounting brackets for wall mounting or attaching to a flat surface.
What should I do if there is no video output?
Check the power LED, ensure the fiber cable is securely connected and not damaged, verify the transmitter is working, and confirm the SDI output rate is supported (up to 3G). Also check that the BNC cable is properly terminated.
User questions about OMX-3GSDI-FIBER Ocean Matrix
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual OMX-3GSDI-FIBER - Ocean Matrix and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. OMX-3GSDI-FIBER by Ocean Matrix.
USER MANUAL OMX-3GSDI-FIBER Ocean Matrix
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Ocean Matrix
Model : OMX-3GSDI-FIBER
Category : Receiver