OMX-HDMI-HDBIT - Receiver Ocean Matrix - Free user manual and instructions
Find the device manual for free OMX-HDMI-HDBIT Ocean Matrix in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | HDBaseT HDMI Receiver |
| HDMI Compatibility | HDMI 1.4 with HDCP 1.4/2.2 support |
| Video Resolution | Up to 4K@60Hz (4:4:4 8-bit) and 1080p@120Hz |
| Transmission Distance | 100 m over CAT5e/6 cable |
| Input Interface | HDBaseT (RJ45) |
| Output Interface | HDMI Type A |
| Audio Formats | PCM 2.0/5.1, Dolby Digital, DTS |
| Control Extension | IR pass-through and RS-232 up to 115200 baud |
| Power over HDBaseT | Yes, receives power from transmitter (PoH) |
| Power Supply | 5V DC 2A adapter (backup if PoH not used) |
| Housing | Metal chassis, black finish |
| LED Indicators | Power, Link, Signal status |
| Mounting | Wall-mount brackets and table stand included |
| Dimensions (W×D×H) | 4.1 × 2.9 × 1.0 in (105 × 74 × 25 mm) |
| Weight | 8.8 oz (250 g) |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Compliance | CE, FCC, RoHS |
| Maintenance | Wipe with a dry, soft cloth; do not use liquids |
| Warranty | Limited 1-year parts and labor |
Frequently Asked Questions - OMX-HDMI-HDBIT Ocean Matrix
How do I connect the OMX-HDMI-HDBIT receiver?
Connect a Cat5e/6 cable from the HDBaseT transmitter to the RJ45 input on the receiver. Then run an HDMI cable from the receiver's HDMI output to your display. Power is typically supplied via the transmitter using PoH, or connect the included 5V adapter as a fallback.
What is the maximum transmission distance?
The OMX-HDMI-HDBIT supports reliable 4K transmission up to 100 meters over a single CAT6 cable. For 1080p you can achieve the same distance over CAT5e.
Does it support 4K HDR?
Yes, it supports 4K@60Hz with 4:4:4 8-bit color, which is sufficient for standard HDR (HDR10) when used with compatible sources and displays. For deep color 10/12-bit, resolution may be reduced.
Can I extend IR remote signals with this receiver?
Absolutely. The receiver has an IR pass-through feature. Connect an IR receiver to the transmitter and an IR blaster to the receiver’s IR output, or vice versa, to control devices at both ends.
Does it support RS-232 control?
Yes, the unit provides bidirectional RS-232 pass-through at baud rates up to 115200. This is useful for integrating with serial-controlled displays or media players.
What do the LED indicators mean?
The receiver has three LEDs: PWR (power on), LINK (HDBaseT link established with transmitter), and SIGNAL (active HDMI signal detected). If LINK is off, check the cable connection between transmitter and receiver.
Can the receiver be powered from the transmitter?
Yes, it supports Power over HDBaseT (PoH). If your transmitter provides PoH, no local power adapter is needed. Otherwise, use the included 5V DC adapter.
Is the unit wall-mountable?
Yes, it comes with wall-mount brackets that allow the receiver to be fixed to a wall or other flat surface. The metal housing includes mounting holes for versatile installation.
How do I clean the OMX-HDMI-HDBIT?
Disconnect all cables first. Use a soft, dry cloth to wipe the housing. Avoid using water, solvents, or abrasive cleaners, which may damage the finish or internals.
What is the warranty period?
The receiver comes with a 1-year limited warranty against defects in materials and workmanship. Keep your receipt and contact Ocean Matrix support for return instructions if needed.
User questions about OMX-HDMI-HDBIT Ocean Matrix
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual OMX-HDMI-HDBIT - Ocean Matrix and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. OMX-HDMI-HDBIT by Ocean Matrix.