KC90PO - Range hood SMEG - Free user manual and instructions
Find the device manual for free KC90PO SMEG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Chimney range hood |
| Brand | Smeg |
| Model | KC90PO |
| Width | 90 cm |
| Depth | 50 cm |
| Minimum height | 65 cm |
| Maximum height | 110 cm |
| Weight | Approx. 18 kg |
| Power supply | 220-240 V / 50 Hz |
| Maximum extraction rate | 700 m³/h |
| Number of speeds | 3 + intensive |
| Maximum noise level | 65 dB(A) |
| Motor | Single motor |
| Lighting | LED, 2 x 3 W |
| Control type | Electronic push buttons |
| Grease filter | Aluminium, dishwasher-safe |
| Carbon filter | Optional, for recirculation mode |
| Operating modes | Ducted / Recirculation |
| Energy efficiency class | A |
| Safety device | Thermal cut-out |
| Maintenance | Easy-to-clean surfaces, removable filters |
| Spare parts availability | Available from Smeg customer service |
| Warranty | 2 years (depending on country) |
Frequently Asked Questions - KC90PO SMEG
How to install the SMEG KC90PO range hood?
Installation must be carried out by a qualified technician. Ensure the hood is at least 65 cm above electric hobs and 75 cm above gas hobs. Follow the manual for proper ducting and electrical connection.
How do I clean the grease filters?
Remove the filters and wash them in a dishwasher or by hand with warm water and mild detergent. Allow to dry fully before reinstalling. Clean at least monthly.
How often should the carbon filter be replaced?
In recirculation mode, replace the carbon filter every 4-6 months or when the filter saturation indicator (if available) signals it. Consult your manual for specific guidance.
Can I use the hood in recirculation mode without a carbon filter?
No, the carbon filter is essential for recirculation mode to absorb odors. Without it, the hood will not effectively filter cooking smells.
Why is the hood noisy?
Noise can increase with higher speeds. Check that the filters are clean and installed correctly. Ensure the ducting is not blocked and has no sharp bends. If noise persists, contact technical support.
How do I replace the LED lights?
Switch off the power. Remove the light cover and replace the LED module with a genuine Smeg spare part. If unsure, contact the service center.
What is the optimal height above the cooktop?
The recommended height is 65-75 cm depending on the cooking appliance. For gas hobs, use 75 cm to avoid heat damage.
Can the hood be installed as an island hood?
The KC90PO is designed as a wall-mounted chimney hood. For island installation, you would need an appropriate island hood model.
How do I reset the filter saturation indicator?
After cleaning or replacing filters, turn off the hood, then press and hold a specific button (usually the light or a dedicated reset button) for 3-5 seconds until the indicator resets.
What should I do if the hood does not start?
Check the power supply and ensure the plug is connected. Verify the fuse or circuit breaker. If the display remains off, contact Smeg customer service.
User questions about KC90PO SMEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual KC90PO - SMEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KC90PO by SMEG.
USER MANUAL KC90PO SMEG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SMEG
Model : KC90PO
Category : Range hood