KC90PX - Range hood SMEG - Free user manual and instructions
Find the device manual for free KC90PX SMEG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wall-mounted chimney range hood |
| Brand | Smeg |
| Model | KC90PX |
| Finish | Stainless steel |
| Width | 90 cm |
| Depth | 50 cm |
| Height | 68 - 118 cm (adjustable) |
| Max Airflow | 700 m³/h |
| Number of Speeds | 4 (including boost) |
| Control Type | Electronic push buttons |
| Lighting | 2 x LED strip |
| Grease Filter | Washable aluminum filter |
| Charcoal Filter | Optional for recirculation mode |
| Energy Class | B |
| Noise Level (max) | 65 dB |
| Motor Power | 250 W |
| Installation Type | Ducted or recirculating |
| Exhaust Diameter | 150 mm |
| Safety Features | Thermal overload protection |
| Maintenance | Washable filters, easy access |
| Warranty | 2 years |
Frequently Asked Questions - KC90PX SMEG
How do I clean the grease filters?
The grease filters are aluminum and washable. Remove them from the hood and wash either by hand with warm soapy water or in the dishwasher (maximum 65°C). Ensure they are completely dry before reinstalling.
Can the hood be used in recirculation mode?
Yes, the KC90PX supports recirculation mode with the addition of a charcoal filter (model depends on your region). This is useful when ducting outside is not possible.
How often should I replace the charcoal filter?
The activated charcoal filter should be replaced every 3 to 6 months depending on cooking frequency. A saturated charcoal filter will reduce efficiency and increase noise.
The hood is loud, what can I do?
Check that the grease filters are clean and properly installed. Also ensure the ducting is not blocked. If noise persists, verify that the hood is securely mounted and not resonating against the wall.
How do I reset the filter alarm?
After cleaning or replacing the filters, press and hold the speed selection button (or the designated reset button) for about 3 seconds until the indicator light turns off. Refer to your manual for exact steps.
What is the correct installation height?
For minimum safety, install the hood at a height of 65 cm above an electric cooktop and 75 cm above a gas cooktop. This ensures effective extraction and complies with safety regulations.
Does the hood have an LED lighting system?
Yes, this model includes 2 LED strips that provide bright, energy-efficient illumination over the cooking area, improving visibility while cooking.
How do I adjust the speed settings?
Use the electronic control panel to select between the available speeds (typically 3 speeds plus a boost function). Press the + and - buttons to increase or decrease the extraction power.
Is it necessary to use the ducting kit?
If you plan to use the hood in extraction mode (venting outside), a ducting kit is required. For recirculation mode, you only need the charcoal filter and a deflector plate, which are often sold separately.
What does the 'boost' function do?
The boost function activates the maximum extraction power for a short period, typically 5 minutes, to quickly clear strong odors and heavy steam. It automatically returns to the previous speed afterwards.
User questions about KC90PX SMEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual KC90PX - SMEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KC90PX by SMEG.
USER MANUAL KC90PX SMEG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SMEG
Model : KC90PX
Category : Range hood