E16 - Security Camera ACTi - Free user manual and instructions
Find the device manual for free E16 ACTi in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera |
| Brand | ACTi |
| Model | E16 |
| Image Sensor | 1/2.7" Progressive CMOS |
| Resolution | 1920 x 1080 (Full HD) |
| Lens Type | Fixed focal length |
| Focal Length | 2.8 mm |
| Angle of View | 100° (horizontal) |
| Night Vision | Infrared LED, up to 20 m |
| Compression | H.264, MJPEG |
| Power Supply | 12V DC or PoE (802.3af) |
| Power Consumption | 5.5W max |
| Dimensions (W x H x D) | 70 x 60 x 130 mm |
| Weight | 350 g |
| Mounting | Wall or ceiling mount |
| Operating Temperature | -10°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Memory Card Slot | microSD up to 128GB |
| Connectivity | Ethernet 10/100 Mbps |
| Alarm Input/Output | 1 input / 1 output |
| Maintenance | Clean lens with soft dry cloth |
| Safety | CE, FCC compliant |
| Spare Parts & Repairability | Contact support for spare parts |
Frequently Asked Questions - E16 ACTi
How do I reset the ACTi E16 to factory defaults?
Press and hold the reset button on the camera for 10 seconds using a paperclip. The camera will reboot and restore all settings to factory defaults.
How can I connect the E16 to my network?
The E16 supports Power over Ethernet (PoE) and standard Ethernet. Connect an Ethernet cable from your router or PoE switch to the camera's LAN port, and power will be supplied and network connection established automatically.
What is the default IP address and login credentials?
The default IP address is 192.168.0.100 (or use ACTi's free IP finder tool). The default username is admin and password is 123456. Change the password on first login for security.
How do I configure motion detection on the E16?
Go to the camera's web interface under Configuration > Motion Detection. Enable motion detection, draw detection zones, and set sensitivity levels. You can also schedule recording triggers.
Can I view the E16 remotely on my smartphone?
Yes, use the ACTi Mobile Client app (iOS/Android). Add the camera using its IP address or via the P2P function with the camera's serial number. Ensure remote access is enabled in the camera settings.
How do I update the firmware on the E16?
Download the latest firmware from the ACTi website. In the camera web interface, go to Maintenance > Firmware Upgrade, choose the file, and upload. Do not power off during the upgrade.
What type of microSD card is supported and how do I install it?
The E16 supports microSD cards up to 128GB, Class 10 or higher. Open the waterproof cover on the camera side, insert the card into the slot, and format it from the web interface under Storage Management.
How should I clean the camera lens?
Use a soft, dry microfibre cloth to gently wipe the lens. For stubborn dirt, slightly moisten the cloth with water or a lens cleaner. Avoid abrasive materials that could scratch the lens.
Is the E16 suitable for outdoor use?
Yes, the E16 has an IP67 weatherproof rating, making it resistant to dust and rain. It also operates in temperatures from -10°C to 50°C, so it can withstand typical outdoor environments.
How can I enable audio recording on the E16?
The E16 has a built-in microphone. In the web interface, go to Configuration > Audio and enable audio streaming. For two-way audio, connect an external speaker to the audio output terminal if available.
User questions about E16 ACTi
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual E16 - ACTi and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. E16 by ACTi.
USER MANUAL E16 ACTi
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ACTi
Model : E16
Category : Security Camera