E217 - Security Camera ACTi - Free user manual and instructions
Find the device manual for free E217 ACTi in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Outdoor bullet IP security camera |
| Model | E217 |
| Brand | ACTi |
| Image Sensor | 1/2.7 inch CMOS |
| Resolution | 2 Megapixels (1920x1080) |
| Lens | Fixed focal 3.6 mm, F1.8 |
| Field of View | 78 degrees horizontal |
| Night Vision | Infrared LEDs, up to 20 m range |
| Video Compression | H.264, MJPEG |
| Frame Rate | Up to 30 fps at 1080p |
| Network Interface | 10/100 Base-T Ethernet, RJ45 |
| Power Supply | PoE IEEE 802.3af or DC 12V |
| Power Consumption | 5 W typical |
| Ingress Protection | IP66 weatherproof |
| Operating Temperature | -20°C to 50°C |
| Dimensions | 70 x 180 mm |
| Weight | 500 g |
| Mounting | Wall or ceiling bracket |
| Storage | microSD card slot, up to 128 GB |
| Motion Detection | Built-in video motion detection |
| Maintenance | Clean lens with a soft dry cloth; keep ventilation unobstructed |
| Safety | Use certified PoE injector; install surge protection outdoors |
| Spare Parts | Replacement lens, IR board, and mounting bracket |
| General Information | Compatible with ACTi NVR and free CMS software |
Frequently Asked Questions - E217 ACTi
What is the default IP address of the ACTi E217 camera?
The default network settings are IP address 192.168.0.100, subnet mask 255.255.255.0. Use the ACTi IP Utility tool to discover the camera on your network.
How do I reset the ACTi E217 to factory defaults?
Press and hold the reset button on the side of the camera for about 10 seconds while the camera is powered on. The camera will reboot with factory settings, including the default IP.
Can I use the E217 without a PoE switch?
Yes, you can power the camera with a 12V DC power adapter (not included). Connect the power jack to the camera and use a standard Ethernet cable for network data.
How do I view the camera remotely over the Internet?
Configure a static IP or dynamic DNS on your router, forward port 80 for HTTP and port 554 for RTSP, then access the camera via the ACTi CMS or web browser from any location.
Does the E217 support Wi-Fi?
No, the E217 is a wired Ethernet camera. It requires a standard Ethernet cable for network connectivity. To make it wireless, use an Ethernet-to-Wi-Fi bridge.
How do I update the firmware on my ACTi E217?
Download the latest firmware from the ACTi support website. Log into the camera's web interface, go to Administration > Firmware Upgrade, upload the file, and wait for the camera to reboot. Do not disconnect power during the update.
What is the maximum resolution and frame rate?
The camera records at 1920x1080 (1080p) with up to 30 frames per second. It also supports 720p and lower resolutions for bandwidth saving.
Is the E217 suitable for outdoor use?
Yes, it has an IP66 weatherproof housing, protecting it against rain and dust. The operating temperature range is from -20°C to 50°C, making it suitable for most climates.
Can I store footage directly on the camera without a DVR/NVR?
Yes, the E217 includes a microSD card slot that supports cards up to 128 GB. Insert a card to enable local recording in the camera settings.
What is the night vision range?
The camera has built-in infrared LEDs with a range of approximately 20 meters in complete darkness, enabling clear monochrome images at night.
User questions about E217 ACTi
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual E217 - ACTi and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. E217 by ACTi.
USER MANUAL E217 ACTi
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ACTi
Model : E217
Category : Security Camera