SKS-HT240 - Loudspeaker ONKYO - Free user manual and instructions
Find the device manual for free SKS-HT240 ONKYO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 5.1 Channel Home Theater Speaker System |
| Model | Onkyo SKS-HT240 |
| Number of Channels | 5.1 (5 satellites and 1 powered subwoofer) |
| Front Speakers | 2-way bass reflex bookshelf speakers |
| Center Speaker | 2-way bass reflex center channel |
| Surround Speakers | 2-way bass reflex satellite speakers |
| Subwoofer | Powered subwoofer with built-in amplifier |
| Impedance | 6 ohms |
| Frequency Response | 30 Hz - 50 kHz |
| Sensitivity | 83 dB (2.83 V, 1 m) |
| Power Handling (Satellites) | 100 W per channel (max) |
| Power Handling (Center) | 100 W (max) |
| Power Handling (Subwoofer) | 120 W (built-in amplifier) |
| Dimensions (Front) | 20.0 x 15.0 x 28.0 cm (W x H x D) |
| Dimensions (Center) | 30.0 x 10.0 x 15.0 cm |
| Dimensions (Surround) | 15.0 x 10.0 x 20.0 cm |
| Dimensions (Subwoofer) | 27.0 x 30.0 x 30.0 cm |
| Weight (Total System) | Approximately 15 kg |
| Power Supply (Subwoofer) | AC 120V/240V, 60/50 Hz |
| Connectivity | Speaker wire connections to AV receiver |
| Maintenance | Wipe with a soft, dry cloth |
| Safety Warnings | Keep away from moisture and heat sources |
| Spare Parts & Repairability | Contact Onkyo authorized service for replacement drivers |
Frequently Asked Questions - SKS-HT240 ONKYO
How do I connect the SKS-HT240 speaker system to my AV receiver?
Connect each speaker to the corresponding output terminal on your receiver using speaker wire. Match the polarity. The subwoofer connects via an RCA cable to the subwoofer pre-out.
What is the impedance of the speakers?
The SKS-HT240 speakers have an impedance of 6 ohms, compatible with most AV receivers.
Can I use the satellite speakers without the subwoofer?
The system is designed as a full 5.1 setup. Using satellites alone may result in limited bass response. For best sound, use the subwoofer.
How should I place the surround speakers?
Place them at or slightly above ear level, positioned to the sides or behind the listening area.
What is the recommended amplifier power for this speaker system?
A receiver delivering 100-150W per channel is recommended for optimal performance.
How do I clean the speakers?
Use a soft dry cloth to wipe the cabinets. Avoid using solvents or water.
Can I mount the speakers on the wall?
The speakers have keyhole slots for wall mounting. Use appropriate wall brackets and ensure the wall can support the weight.
What should I do if I hear distortion?
Reduce the receiver volume or check the speaker wire connections. Ensure the polarity is correct.
How do I connect the subwoofer?
Connect one end of the RCA cable to your receiver's subwoofer pre-out and the other to the subwoofer input. Plug the power cord into an AC outlet.
Is the SKS-HT240 compatible with 4K receivers?
Yes, since they are passive speakers, they work with any AV receiver that has speaker terminals. The subwoofer uses RCA input.
User questions about SKS-HT240 ONKYO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual SKS-HT240 - ONKYO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SKS-HT240 by ONKYO.
USER MANUAL SKS-HT240 ONKYO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ONKYO
Model : SKS-HT240
Category : Loudspeaker