HTP-2 - Loudspeaker ONKYO - Free user manual and instructions
Find the device manual for free HTP-2 ONKYO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Loudspeaker |
| Brand | Onkyo |
| Model | HTP-2 |
| Design | 2-way bass reflex |
| Woofer Size | 5.25 inches |
| Tweeter Size | 1 inch soft dome |
| Impedance | 8 ohms |
| Sensitivity | 87 dB |
| Frequency Response | 80 Hz – 20 kHz |
| Power Handling (RMS) | 100 W |
| Peak Power Handling | 150 W |
| Connectivity | Binding posts |
| Dimensions (W x H x D) | 10.2 x 6.3 x 8.5 inches |
| Weight | 5.0 lbs each |
| Finish | Black wood grain vinyl |
| Protective Grille | Detachable black cloth grille |
| Mounting | Keyhole bracket for wall mounting |
| Recommended Placement | Bookshelf or stand |
| Maintenance | Wipe with a soft, dry cloth |
| Safety | Place on stable surface; avoid moisture |
| Spare Parts | Contact Onkyo customer support |
| General Information | Part of Onkyo HTP-2 home theater system |
Frequently Asked Questions - HTP-2 ONKYO
How do I connect the Onkyo HTP-2 speakers to my receiver?
Use standard speaker wire. Connect the positive terminal on the speaker to the positive terminal on your receiver, and negative to negative. Ensure the receiver is turned off during connection.
What is the recommended placement for the HTP-2 speakers?
Place them on stable bookshelves or speaker stands at ear level when seated. Avoid corners and walls to prevent bass boom. For best stereo imaging, angle them toward the listening position.
Can I mount the HTP-2 speakers on the wall?
Yes, each speaker has a keyhole bracket on the back for wall mounting. Use appropriate screws and anchors for your wall type. Ensure the speaker is securely fastened.
What is the impedance of the HTP-2 speakers?
The impedance is 8 ohms, which is compatible with most home theater receivers. Check your receiver’s specifications to ensure it can drive 8-ohm speakers.
How do I clean the Onkyo HTP-2 speakers?
Wipe the cabinet with a soft, dry cloth. For the grille, use a vacuum with a brush attachment or gently dust it. Do not use any liquids or cleaning agents.
What should I do if there is no sound from one speaker?
Check the speaker wire connections at both the speaker and receiver. Ensure the receiver is set to the correct speaker configuration. Try swapping the speaker with another to isolate the issue. If the problem persists, the speaker may be faulty.
Can I use the HTP-2 speakers for stereo music listening?
Absolutely. While they are designed for home theater, they perform well for stereo music. Adjust your receiver to stereo mode for optimal sound quality.
What is the power handling of the HTP-2 speakers?
The RMS power handling is 100 watts, with a peak of 150 watts. Ensure your receiver does not exceed this to prevent damage.
Are the HTP-2 speakers magnetically shielded?
No, they are not magnetically shielded. Keep them at least 12 inches away from CRT televisions or other magnetic-sensitive devices to avoid interference.
Can I order replacement parts for the HTP-2 speakers?
Contact Onkyo customer support or visit their official website for information on spare parts and repairs. Keep your model number and serial number ready.
User questions about HTP-2 ONKYO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual HTP-2 - ONKYO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HTP-2 by ONKYO.
USER MANUAL HTP-2 ONKYO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ONKYO
Model : HTP-2
Category : Loudspeaker