FHR 2050 - Heating Orbegozo - Free user manual and instructions
Find the device manual for free FHR 2050 Orbegozo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Fan heater |
| Brand | Orbegozo |
| Model | FHR 2050 |
| Power | 2000 W (2 levels: 1000 / 2000 W) |
| Power supply | 220-240 V ~ 50 Hz |
| Recommended area | Approximately 20 m² |
| Thermostat | Adjustable |
| Overheat protection | Yes |
| Automatic shutdown | Yes |
| Cold air function | Yes |
| Material | ABS |
| Dimensions (W x H x D) | 16 x 22 x 11 cm |
| Weight | 0.95 kg |
| Cable length | 1.5 m |
| Noise level | Approximately 38 dB |
| Maintenance | Clean the exterior and grille with a dry cloth |
| Repairability | Spare parts available from Orbegozo after-sales service |
| Standards | CE |
Frequently Asked Questions - FHR 2050 Orbegozo
How to adjust the temperature of the FHR 2050?
The built-in thermostat allows you to set the desired temperature. Turn the knob until the indicator light turns on, then the heater stops automatically once the temperature is reached.
Is this heater suitable for a bathroom?
No, this heater is not designed for damp rooms. It must be used in a dry environment away from water sources.
How to clean the device?
Always unplug the device before cleaning. Use a soft, dry cloth to wipe the exterior and the air inlet grille. Never use water or abrasive products.
What area can the FHR 2050 heat?
It is recommended for rooms up to approximately 20 m², depending on insulation and outside temperature.
Can I use a power strip to plug in this heater?
It is best to plug the device directly into a wall outlet. A power strip can cause an electrical overload.
What to do if the heater does not turn on?
Check that the device is properly plugged in and that the thermostat is set above room temperature. Also check the condition of the cable and the outlet.
Is there a filter to replace?
No, the FHR 2050 is filterless. A simple periodic cleaning of the grille is sufficient.
Does the device have overheat protection?
Yes, a built-in thermal protection automatically cuts off the power in case of overheating to prevent any fire risk.
Is the noise level high?
The noise level is about 38 dB, which is reasonable for a fan heater of this power.
What is the power consumption?
In high position (2000 W), it consumes 2 kWh per hour. In low position (1000 W), it consumes 1 kWh per hour. Use the thermostat to reduce consumption.
User questions about FHR 2050 Orbegozo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual FHR 2050 - Orbegozo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FHR 2050 by Orbegozo.
USER MANUAL FHR 2050 Orbegozo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Orbegozo
Model : FHR 2050
Category : Heating