WS-32M204D - Television SAMSUNG - Free user manual and instructions
Find the device manual for free WS-32M204D SAMSUNG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | CRT Television |
| Brand | Samsung |
| Model | WS-32M204D |
| Screen Size | 32 inches (81 cm) widescreen |
| Display Type | Cathode Ray Tube (CRT) |
| Aspect Ratio | 16:9 |
| Video System | PAL / SECAM |
| Sound System | NICAM Stereo, A2 |
| Teletext | Yes, with 1000 pages memory |
| Scan Rate | 100 Hz Digital Plus |
| Connectivity | 2 Scart sockets, AV input, RF in |
| Power Consumption | 150 W (standby < 1 W) |
| Dimensions (with stand) | 800 x 600 x 470 mm |
| Dimensions (without stand) | 800 x 560 x 470 mm |
| Weight | 32 kg |
| Features | Restoration of picture detail, DNIe, Virtual Dolby Surround |
| Safety | Do not install near heat sources or in direct sunlight |
| Cleaning | Wipe with a soft, dry cloth only |
| Spare Parts | Available through certified Samsung service centers |
| Repairability | CRT components can be replaced by qualified technicians |
Frequently Asked Questions - WS-32M204D SAMSUNG
How do I connect an antenna to the WS-32M204D?
Connect your antenna cable to the RF input located on the back of the television. Then select the appropriate source using the remote control.
Why is the picture distorted or wavy?
This may be caused by external interference. Keep devices like mobile phones or speakers at a distance. Also ensure the TV is set to the correct channel for the input source.
How can I clean the screen without damaging it?
Dust the screen with a soft, dry cloth. If needed, slightly dampen the cloth with water only. Never use alcohol, ammonia, or abrasive cleaners.
What is the 100Hz feature and how do I turn it on?
100Hz technology reduces flicker and improves motion clarity. You can enable it via the Picture menu on the remote control by setting the 100Hz option to On.
Why is there no sound but picture is fine?
Check that the audio is not muted and that the volume is not set to zero. Also verify that the correct sound mode (Stereo or Mono) is selected in the Sound menu.
Can I use this TV with a DVD player?
Yes, connect the DVD player to one of the Scart sockets using a Scart cable. Select the corresponding AV channel using the Source button on the remote.
How do I set parental controls on the TV?
Press the Menu button, go to the Features or Setup submenu, and look for Parental Lock. Enter the default PIN (usually 0000) and adjust the ratings.
The remote control is not working. What should I do?
First, replace the batteries. Make sure nothing is blocking the sensor on the TV. If it still does not work, point the remote toward the sensor and press each button slowly.
How much power does the television consume in standby mode?
In standby mode, the power consumption is less than 1 watt to comply with energy saving regulations. Unplug the TV from the mains to cut all power.
Can I connect external speakers to this model?
The WS-32M204D does not have a headphone output or dedicated speaker terminals. Use Scart adaptors with audio outputs, but note that the internal amplifier remains active only for the TV speakers.
User questions about WS-32M204D SAMSUNG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Television in PDF format for free! Find your manual WS-32M204D - SAMSUNG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WS-32M204D by SAMSUNG.
USER MANUAL WS-32M204D SAMSUNG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SAMSUNG
Model : WS-32M204D
Category : Television