TG787v Gateway - Network gateway THOMSON - Free user manual and instructions
Find the device manual for free TG787v Gateway THOMSON in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Gateway (Modem/Router) |
| Brand | Thomson |
| Model | TG787v |
| Connectivity Technology | Wired & Wireless |
| ADSL Support | ADSL2+, ADSL2, ADSL (ANSI T1.413) |
| Ethernet Ports | 4 x 10/100 Mbps RJ-45 |
| Wireless Standard | IEEE 802.11b/g/n |
| Wireless Band | 2.4 GHz |
| Maximum Wireless Speed | 300 Mbps |
| USB Port | 1 x USB 2.0 (storage/printer share) |
| VoIP Ports | 2 x FXS (RJ-11) |
| Firewall | SPI, DoS protection |
| VPN Support | PPTP, L2TP pass-through |
| QoS | Yes (bandwidth management) |
| Management | Web-based configuration |
| Security Encryption | WEP 64/128, WPA-PSK, WPA2-PSK |
| Power Supply | 12V DC, 1A external |
| Power Consumption | 15 W typical |
| Dimensions (W x D x H) | 250 x 190 x 40 mm |
| Weight | 500 g |
| Operating Temperature | 0°C to 40°C |
| Maintenance & Cleaning | Clean with a soft dry cloth; avoid liquids |
| Safety Instructions | Use supplied adapter, ensure ventilation, keep dry |
| Repairability | No user-serviceable parts; contact support |
Frequently Asked Questions - TG787v Gateway THOMSON
How do I reset my Thomson TG787v to factory defaults?
To reset, press and hold the Reset button on the back panel for at least 10 seconds until the power LED flashes. This will restore the device to its default settings.
What are the default login credentials for the web interface?
The default IP address is 10.0.0.1 and login is admin for both username and password. After login, we recommend changing the password immediately.
How do I configure the wireless network on my TG787v?
Access the web interface, go to Wireless menu, set the SSID and choose a security mode like WPA2-PSK, then enter a passphrase.
How do I set up a PPPoE connection for DSL?
In the web interface, go to Internet Settings, select PPP over Ethernet (PPPoE), enter your username and password provided by your ISP, and save settings.
Why is my internet connection dropping often?
This can be caused by signal interference on the DSL line or outdated firmware. Try updating the firmware and check the DSL cable connections.
How do I update the firmware?
Download the latest firmware from the official Thomson/Technicolor website, go to Management > Firmware Update, and upload the file.
How do I enable WPA2 encryption for WiFi?
Navigate to Wireless Settings, choose WPA2-PSK as the security mode, and set a strong passphrase of at least 8 characters.
Can I use the TG787v with a cable modem?
No, the TG787v is designed for ADSL/ADSL2+ connections. It does not have an Ethernet WAN port for cable modems.
How do I change the admin password?
Log in to the web interface, go to Management > Access Control, enter the current password, then set a new one.
How do I connect a VoIP phone?
Connect the phone to the FXS phone port (labeled Phone 1) on the back of the device. Then configure your SIP account settings in the VoIP section.
User questions about TG787v Gateway THOMSON
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network gateway in PDF format for free! Find your manual TG787v Gateway - THOMSON and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TG787v Gateway by THOMSON.
USER MANUAL TG787v Gateway THOMSON
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : THOMSON
Model : TG787v Gateway
Category : Network gateway