SALORA

DVB 420-C - Receiver SALORA - Free user manual and instructions

Find the device manual for free DVB 420-C SALORA in PDF.

📄 37 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice SALORA DVB 420-C - page 27
View the manual : English EN Suomi FI Svenska SV
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Digital Cable Receiver
Brand Salora
Model DVB 420-C
Tuner DVB-C (MPEG-2/MPEG-4)
Video Resolution Up to 1080p (Full HD)
Audio Decoding MPEG-1, MPEG-2, Dolby Digital
Channel Storage Up to 2000 channels
Memory Flash 256 MB, RAM 256 MB
Connectivity HDMI, SCART, USB, Ethernet RJ45
Smart Card Slot 1x (with CI+ support)
Power Supply 230V AC, 50Hz
Power Consumption Max 15W, Standby <1W
Dimensions 260 × 160 × 45 mm
Weight 0.8 kg
Remote Control Included
Display LED 4-digit
EPG 7-day Electronic Program Guide
Parental Lock Yes (PIN protected)
Maintenance Wipe with a dry, soft cloth; do not expose to moisture.
Safety Place in a well-ventilated area; avoid direct sunlight and rain.
Repairability Spare parts available; contact authorized service center for repairs.
General Information Designed for reception of free-to-air and encrypted cable channels.

Frequently Asked Questions - DVB 420-C SALORA

How do I scan channels on the Salora DVB 420-C?
To scan channels, press the Menu button on the remote, go to Installation or Setup, select Channel Search or Automatic Scan, choose the correct cable frequency and symbol rate, then start the search. The receiver will store all found channels.
Why does my receiver show 'No Signal'?
Check that the coaxial cable is firmly connected to the ANT IN port. Ensure your cable subscription is active, and that the correct cable network parameters (frequency, symbol rate) are set. Also confirm the receiver is in DVB-C mode and not in terrestrial mode.
How can I manually tune a channel on this receiver?
Go to Menu > Installation > Manual Tuning. Enter the frequency, symbol rate, QAM modulation, and other network parameters provided by your cable operator. After entering, select Search to find the channel.
Does the DVB 420-C support high-definition (HD) channels?
Yes, the receiver supports MPEG-4 HD channels with resolutions up to 1080p, provided your cable provider broadcasts in HD and your subscription includes them.
How do I connect the receiver to my television?
Use an HDMI cable for the best quality; connect one end to the receiver's HDMI output and the other to your TV's HDMI input. Alternatively, you can use a SCART cable if your TV only has SCART. For audio via HDMI, ensure your TV is set to the correct input.
What should I do if the picture freezes or stutters?
Check your cable signal strength in the Signal Meter under Installation. A weak or unstable signal can cause freezing. Also verify all cables are secure and not damaged. If using a splitter, try connecting directly to the wall outlet.
How do I update the firmware on the DVB 420-C?
Download the latest firmware from the Salora website to a USB flash drive formatted in FAT32. Insert the USB into the receiver, go to Menu > System > Upgrade, choose USB, and follow the on-screen prompts. Do not power off during the update.
Can I record programs using a USB drive?
Yes, the receiver supports PVR (Personal Video Recording) and Timeshift. Connect a USB flash drive or external HDD (at least 4GB) to the USB port, then press the Record button for live recording or set timer recordings via the EPG.
How do I reset the receiver to factory settings?
Go to Menu > System > Factory Settings and confirm the reset. This will erase all channels and personal settings, so you will need to rescan channels afterward.
Does the remote control require any special setup?
The provided remote control works directly with the receiver after inserting 2 AAA batteries. To control your TV volume, you may need to program the remote with your TV's code; find the list in the manual's remote control section and enter the code via the TV mode button.

User questions about DVB 420-C SALORA

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Receiver in PDF format for free! Find your manual DVB 420-C - SALORA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DVB 420-C by SALORA.

USER MANUAL DVB 420-C SALORA

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : SALORA

Model : DVB 420-C

Category : Receiver