500500 - Access Point Intellinet - Free user manual and instructions
Find the device manual for free 500500 Intellinet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Access Point |
| Brand | Intellinet |
| Model | 500500 |
| Wireless Standard | IEEE 802.11ac/a/b/g/n |
| Frequency Band | Dual-band: 2.4 GHz and 5 GHz |
| Maximum Data Rate | 1200 Mbps (300 Mbps on 2.4 GHz, 867 Mbps on 5 GHz) |
| Ethernet Port | 1x RJ-45 10/100/1000 Mbps |
| Antennas | Internal omnidirectional antennas |
| Power Input | 12V DC, 1A; or Power over Ethernet (PoE) 802.3af |
| Power Consumption | Max 12W |
| Dimensions (W x D x H) | 160 mm x 110 mm x 30 mm |
| Weight | 200 g |
| Mounting Options | Wall or ceiling mount (brackets included) |
| LED Indicators | Power, LAN, Wireless |
| Security Features | WPA2/WPA3, MAC address filtering, SSID broadcast disable |
| Operating Temperature | 0°C to 40°C |
| Management | Web browser interface, SNMP v1/v2c, Telnet |
| Maximum Connected Clients | Up to 128 devices |
| Maintenance | Clean with a dry soft cloth; avoid liquids and abrasive cleaners |
| Spare Parts | Screws and mounting kit are available as spare parts |
| Repairability | Modular design facilitates access to internal components |
Frequently Asked Questions - 500500 Intellinet
How do I reset the Intellinet 500500 access point to factory defaults?
To reset the device, insert a paperclip into the reset hole on the back panel and hold for about 5 seconds. The LED indicators will blink, and the device will reboot with default settings.
Can I configure the access point as a wireless repeater?
Yes, the Intellinet 500500 supports multiple operation modes including access point, repeater, and bridge. Access the web interface and select the desired mode from the operation mode menu.
Does the 500500 support Power over Ethernet (PoE)?
Yes, the device supports IEEE 802.3af PoE, allowing you to supply power and data over a single Ethernet cable. Ensure your switch or injector is PoE-compliant.
What is the maximum wireless range of this access point?
In an open area, the range can reach up to 150 meters (about 500 feet) outdoors and 30 meters indoors, depending on obstacles and interference.
How can I update the firmware on my unit?
Log into the web management interface, navigate to System > Firmware Upgrade, and upload the latest firmware file downloaded from the official website. Do not disconnect power during the update.
Can I use this as a wireless bridge to connect two networks?
Absolutely. Switch to bridge mode or WDS in the configuration pages. You can then wirelessly link two separate LAN segments.
Which wireless security protocols does it support?
The access point supports WEP, WPA, WPA2, and WPA3 with mixed modes. For best security, we recommend using WPA3-AES.
How do I change the SSID (network name)?
Open the web interface, go to Wireless Settings, and enter a new name in the SSID field. Save the changes and reboot if prompted.
Is there a wall-mounting kit included?
Yes, the package includes mounting brackets and screws for both wall and ceiling installation. Template holes are marked on the device casing.
What is the default IP address for initial configuration?
The default IP address is 192.168.2.254 with a subnet mask of 255.255.255.0. The default username is admin and password is admin.
User questions about 500500 Intellinet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual 500500 - Intellinet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 500500 by Intellinet.
USER MANUAL 500500 Intellinet
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Intellinet
Model : 500500
Category : Access Point