LC1503R - Monitor Planar - Free user manual and instructions
Find the device manual for free LC1503R Planar in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | 15-inch LCD Monitor |
| Screen size | 15 inches (38.1 cm) diagonal |
| Native resolution | 1024 x 768 (XGA) |
| Aspect ratio | 4:3 |
| Brightness | 250 cd/m² |
| Contrast ratio | 400:1 |
| Response time | 25 ms |
| Viewing angle | 160° horizontal / 150° vertical |
| Display colors | 16.2 million |
| Video inputs | VGA (D-Sub) |
| Power supply | 100-240V AC, 50/60 Hz |
| Power consumption | 25 W (typical), <2 W standby |
| Dimensions (W x H x D) | 356 mm x 340 mm x 150 mm |
| Weight | 3.9 kg |
| VESA mount compatibility | 75 x 75 mm |
| On-screen display (OSD) controls | Yes |
| Tilt adjustment | Yes |
| Built-in speakers | No |
| Cleaning method | Wipe with a soft dry cloth; do not use harsh chemicals |
| Power management | Supports VESA DPMS |
| Safety features | Kensington lock slot |
| Spare parts availability | Replacement power adapters and VGA cables are available from Planar |
| Repair difficulty | Basic maintenance is user-accessible; internal repairs require qualified technician |
Frequently Asked Questions - LC1503R Planar
How do I connect the monitor to my computer?
Connect the VGA cable from the monitor to the corresponding port on your computer. Tighten the screws finger-tight, then plug the power cable into a grounded outlet and press the power button.
What is the recommended resolution for this monitor?
Set your computer to 1024 x 768 pixels for the sharpest image. This matches the native resolution of the LC1503R panel and avoids scaling artifacts.
How do I adjust brightness and contrast?
Use the OSD menu buttons on the front bezel. Press the Menu button, navigate to 'Brightness' or 'Contrast', then adjust with the +/- keys. Confirm with Menu again.
The screen is flickering, what should I do?
Check the refresh rate in your computer's display settings. Set it to 60 Hz. Also inspect the VGA cable for bent pins and ensure it is securely connected.
How do I clean the screen safely?
Turn off the monitor and unplug it. Wipe the screen gently with a soft lint-free cloth lightly moistened with water. Avoid using solvents or abrasive cleaners.
Can I mount this monitor on a wall?
Yes, the LC1503R has a 75 x 75 mm VESA mount pattern on the back. Use a compatible bracket and follow the instructions for safe installation.
How can I reduce power consumption?
Enable the power management feature in your operating system. The monitor supports VESA DPMS and will enter standby mode when the computer goes idle, drawing less than 2 W.
What should I do if the screen shows 'No Signal'?
Ensure the computer is powered on and the VGA cable is connected. Press the source button on the monitor to select VGA input. Also verify the computer is not in sleep mode.
Do I need to install special drivers?
This monitor uses a plug-and-play interface. Your operating system will recognize it as a generic display. If desired, you can download a driver from Planar's website for full features.
How do I reset the monitor to factory settings?
Open the OSD menu, go to the 'Reset' or 'Factory Reset' option, and confirm. This will restore all display parameters to their original defaults, which can help if settings are misconfigured.
User questions about LC1503R Planar
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Monitor in PDF format for free! Find your manual LC1503R - Planar and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LC1503R by Planar.
USER MANUAL LC1503R Planar
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Planar
Model : LC1503R
Category : Monitor