500533 - Router MuxLab - Free user manual and instructions
Find the device manual for free 500533 MuxLab in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Router |
| Brand | MuxLab |
| Model | 500533 |
| Dimensions | 190 x 127 x 30 mm (7.5 x 5 x 1.2 in) |
| Weight | 500 g (1.1 lbs) |
| Power Supply | 12V DC, 1A adapter included |
| Ethernet Ports | 4 x Gigabit LAN, 1 x Gigabit WAN |
| Wireless Standard | IEEE 802.11a/b/g/n/ac (dual-band) |
| Wireless Speed | Up to 1200 Mbps (300 Mbps on 2.4GHz + 867 Mbps on 5GHz) |
| Antennas | 4 external 5dBi antennas |
| Firewall Features | SPI, NAT, DoS prevention |
| VPN Support | Yes (PPTP, L2TP, IPSec) |
| Management | Web-based interface, QoS, VLAN support |
| LED Indicators | Power, Internet, LAN, Wi-Fi |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| Safety Certifications | FCC, CE |
| Cleaning Instructions | Wipe with a dry, soft cloth |
| Spare Parts & Repairability | Contact MuxLab support for replacement parts |
Frequently Asked Questions - 500533 MuxLab
How do I install the MuxLab 500533 router?
Connect the power adapter to the router and plug it into a wall socket. Connect your internet modem to the WAN port using an Ethernet cable. Finally, connect your computer to one of the LAN ports or join the Wi-Fi network to begin configuration.
How do I reset the router to factory settings?
Locate the reset button on the back panel. Use a pointed object like a paperclip to press and hold the button for about 10 seconds until the power LED starts blinking. The router will reboot with default settings.
How do I configure the Wi-Fi network?
Open a web browser and go to the router’s IP address (usually 192.168.0.1). Log in with the default credentials found in the manual. Then navigate to Wireless Settings and set your SSID and password. Save the settings.
What is the default login username and password?
The default username is usually admin and the default password is also admin or printed on the label. For security, change it after the first login.
How do I update the router firmware?
Go to the Administration section in the web interface and select Firmware Update. Download the latest firmware from the MuxLab website, upload the file, and wait for the router to reboot automatically.
How do I set up a guest network?
In the wireless settings, enable the Guest Network option. Set a separate SSID and password, and configure access to Internet only to keep your main network secure.
Why is my internet connection unstable?
Ensure the WAN cable is securely connected. Restart your modem and router. Check for signal interference from other devices. Also, update the firmware and adjust the wireless channel in the settings.
How do I change the admin password?
Log in to the router, go to Administration > System. Enter the current password, then the new password, and confirm. Click Save to apply.
Can I use the router as an access point?
Yes, you can set it to Access Point Mode. Connect an Ethernet cable from your main router to the LAN port, and change the wireless mode in the settings to AP.
How do I enable parental controls?
Navigate to Parental Controls in the web interface. Create a profile for each device by entering its MAC address. Set time limits or block specific websites.
User questions about 500533 MuxLab
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual 500533 - MuxLab and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 500533 by MuxLab.
USER MANUAL 500533 MuxLab
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MuxLab
Model : 500533
Category : Router