500443 - Router MuxLab - Free user manual and instructions
Find the device manual for free 500443 MuxLab in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dual-Band Gigabit Router |
| Brand | MuxLab |
| Model | 500443 |
| Connectivity | 4 x Gigabit LAN + 1 x Gigabit WAN |
| Wireless Standards | IEEE 802.11a/b/g/n/ac |
| Frequency Bands | 2.4 GHz and 5 GHz simultaneously |
| Maximum Data Rate | Up to 1750 Mbps (450 + 1300 Mbps) |
| Antennas | 4 x 5 dBi external antennas |
| Dimensions (W x D x H) | 7.5 x 5.1 x 1.3 in (19 x 13 x 3.3 cm) |
| Weight | 1.2 lbs (0.54 kg) |
| Power Supply | 12V DC 1A external power adapter |
| Security Protocols | WPA-PSK / WPA2-PSK, WEP encryption |
| Firewall Features | NAT, SPI firewall, IP/MAC filtering |
| VPN Support | PPTP, L2TP, and IPSec pass-through |
| Quality of Service | Yes, supports QoS for traffic optimization |
| Management | Web-based interface, WPS button |
| Additional Features | Guest network, parental controls, IPv6 ready |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Cleaning | Wipe with dry soft cloth; unplug before cleaning |
| Repair & Maintenance | Firmware upgrade via web dashboard; standard screws for disassembly |
| Safety Approvals | CE, FCC, RoHS compliant |
| Eco Mode | Power-saving standby mode when idle |
Frequently Asked Questions - 500443 MuxLab
How do I reset the MuxLab 500443 router to factory defaults?
Press and hold the Reset button on the back panel for 10 seconds using a paper clip. The router will reboot and all settings will return to factory defaults.
What is the default IP address and login credentials?
The default IP address is 192.168.1.1. For login, use the default admin both as username and password, since no password is set by default. It is recommended to change this immediately for security.
How can I change the Wi-Fi SSID and password?
Log in to the web interface, navigate to Wireless Settings, then modify the SSID (network name) and pre-shared key. Save the changes and reconnect your devices with the new credentials.
Does the router support Gigabit Ethernet connections?
Yes, the MuxLab 500443 is equipped with Gigabit Ethernet ports (10/100/1000 Mbps) on all LAN and WAN interfaces, providing high-speed wired connections.
How do I update the router firmware?
Download the latest firmware from the MuxLab website. Log in to the router, go to System Tools > Firmware Upgrade, select the downloaded file, and click upgrade. Do not power off during the process.
Can I set up a guest network?
Yes, the router supports a guest network. In the web interface, navigate to Guest Network settings, enable it, and set a separate SSID and password for guests.
What security protocols are supported?
The router supports WPA-PSK/WPA2-PSK encryption, along with WEP 64/128-bit. WPA2 is strongly recommended for the best security.
How do I configure port forwarding for gaming or servers?
Access the web interface, go to Forwarding > Virtual Servers or Port Forwarding. Enter the service port, IP address of the target device, and protocol. Save to apply.
How can I improve the Wi-Fi signal range?
Place the router in a central, elevated location, away from walls and interference. Adjust the external antennas vertically or horizontally for optimal coverage. You can also select a less congested wireless channel in the settings.
Is the MuxLab 500443 compatible with fiber optic internet?
Yes, the router has a Gigabit WAN port which can be connected directly to an optical network terminal (ONT) provided by your ISP, supporting high-speed fiber connections.
User questions about 500443 MuxLab
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual 500443 - MuxLab and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 500443 by MuxLab.