EKUHWBB - Water heater DAIKIN - Free user manual and instructions
Find the device manual for free EKUHWBB DAIKIN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Hot Water Storage Tank |
| Brand | Daikin |
| Model | EKUHWBB |
| Tank Capacity | 200 L |
| Mounting Type | Floor standing |
| Height | 1800 mm |
| Diameter | 590 mm |
| Dry Weight | 85 kg |
| Water Connection | 1" BSP male |
| Max Working Pressure | 10 bar / 1 MPa |
| Max Water Temperature | 80 °C |
| Heat Exchanger | Smooth coil for heat pump connection |
| Insulation | Polyurethane foam, 50 mm |
| Energy Source | Compatible with heat pump / electric backup |
| Standby Loss | 1.2 kWh/24h (approx.) |
| Protection | Safety valve, thermostat, pressure relief |
| Anode | Replaceable magnesium anode |
| Maintenance | Check anode annually, flush tank |
| Warranty | 2 years manufacturer warranty |
| Certification | CE, PED |
Frequently Asked Questions - EKUHWBB DAIKIN
What type of water heater is the Daikin EKUHWBB?
The Daikin EKUHWBB is a domestic hot water tank designed to work with heat pump systems. It provides an efficient and reliable hot water supply for residential applications.
How do I connect the tank to my heat pump?
Connect the heat pump flow and return lines to the smooth coil heat exchanger connections on the tank. Ensure you use suitable fittings and follow the installation diagram in the manual.
How often should I check the safety valve?
The safety valve should be checked at least once every six months. Lift the lever briefly to allow water to discharge, confirming it is not blocked or faulty.
What temperature should I set for daily use?
A recommended set point is 60 °C to prevent bacterial growth like legionella, while still being energy efficient. Adjust according to your needs.
How do I clean the tank?
Drain the tank completely, open the inspection hatch if available, and remove any sediment. For a closed system, flushing with clean water is usually sufficient. Always disconnect power before servicing.
What type of anode does it use and when to replace?
It uses a magnesium anode that protects the tank from corrosion. Check it annually and replace it when it is worn down to less than 6 mm thick, typically every 2-5 years.
Can the tank be installed outdoors?
The tank is designed for indoor installation only. Exposure to freezing temperatures and weather could damage the unit. Install it in a dry, frost-free room.
What is the standby energy loss?
The standby loss is approximately 1.2 kWh per 24 hours, meaning the tank maintains water temperature efficiently with minimal heat loss.
How do I reset the safety thermostat?
Turn off the power supply, remove the thermostat cover, and press the reset button if it has tripped. If the problem persists, contact a qualified technician.
Where can I find spare parts?
Spare parts such as the anode, safety valve, and thermostat are available from authorized Daikin dealers. Always use genuine Daikin parts to maintain safety and warranty.
User questions about EKUHWBB DAIKIN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual EKUHWBB - DAIKIN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EKUHWBB by DAIKIN.
USER MANUAL EKUHWBB DAIKIN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DAIKIN
Model : EKUHWBB
Category : Water heater