TJS40 - Angle Grinder Tryton - Free user manual and instructions
Find the device manual for free TJS40 Tryton in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Angle grinder |
| Model | TJS40 |
| Brand | Tryton |
| Disc size | 125 mm |
| Power | 1050 W |
| No-load speed | 12000 rpm |
| Spindle thread | M14 |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Weight | 2.1 kg |
| Protection class | II (double insulated) |
| Included accessories | Auxiliary handle, grinding disc, wrench, spindle lock |
| Adjustable guard | Yes |
| Overload protection | Yes |
| Motor type | Carbon brush motor |
| Functions | Grinding, cutting, polishing, sanding |
| Maintenance | Keep ventilation slots clean; replace carbon brushes when worn |
| Cleaning | Clean with dry cloth; avoid water |
| Safety | Always wear protective eyewear and gloves; use guard |
| Spare parts | Carbon brushes, guard, auxiliary handle, disc flanges |
| Repairability | Designed for easy disassembly; spare parts available |
| General | Compact and ergonomic design for comfortable handling |
Frequently Asked Questions - TJS40 Tryton
What disc size does the TJS40 use?
The TJS40 uses a standard 125 mm disc for grinding and cutting. Always ensure the disc is rated for the tool's maximum speed.
Can I use the angle grinder for cutting wood?
You can use a wood-cutting disc, but the grinder is primarily designed for metal and stone. Always use the appropriate cutting disc and never use a grinding disc for cutting.
How do I change the grinding disc?
Press the spindle lock to secure the spindle, then use the included wrench to loosen the flange. Remove the old disc, place the new one, and tighten the flange securely.
What safety precautions should I take?
Always wear safety goggles, gloves, and a dust mask. Use the auxiliary handle for better control, ensure the guard is in place, and disconnect power before changing accessories.
Why does the grinder stop during operation?
This could be due to overload protection. The motor stops automatically to prevent damage. Let it cool for a few minutes and reduce the pressure applied to the disc.
How often should carbon brushes be replaced?
Inspect the carbon brushes every 20-30 hours of use. If they are shorter than 5 mm or show signs of wear, replace them with identical brushes to maintain motor performance.
Can I use a cutting disc for polishing?
No, polishing requires a specific polishing pad. Using a cutting disc for polishing is unsafe and may damage the work surface. Always select the correct accessory for the task.
What is the power rating of the TJS40?
The TJS40 is equipped with a 1050 W motor, providing sufficient power for most DIY and professional grinding and cutting tasks.
Is the angle grinder suitable for masonry work?
Yes, with a proper diamond cutting disc or masonry grinding wheel, the TJS40 can handle brick, concrete, and stone. Always use water suppression or a dust extractor when possible.
How to clean the angle grinder?
Unplug the grinder and use a dry cloth to wipe the exterior. Blow out dust from the ventilation slots with compressed air. Never use water or solvents to clean the tool.
User questions about TJS40 Tryton
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Angle Grinder in PDF format for free! Find your manual TJS40 - Tryton and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TJS40 by Tryton.
USER MANUAL TJS40 Tryton
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Tryton
Model : TJS40
Category : Angle Grinder