SP250 - Pump Global Water - Free user manual and instructions
Find the device manual for free SP250 Global Water in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Submersible Utility Pump |
| Brand | Global Water |
| Model | SP250 |
| Power Supply | 220-240V AC, 50Hz |
| Pump Power | 250W |
| Max Flow Rate | 1200 liters per hour (estimated) |
| Max Head Height | 6 meters (estimated) |
| Hose Connection | 1 inch (25mm) garden hose adapter |
| Cable Length | 3 meters |
| Body Material | Stainless Steel |
| Impeller Material | Thermoplastic |
| Protection Class | IPX8 |
| Thermal Protection | Automatic shut-off |
| Dimensions | 20 x 15 x 18 cm (estimated) |
| Weight | 4 kg (estimated) |
| Noise Level | Less than 50 dB (estimated) |
| Duty Cycle | Continuous |
| Certifications | CE, RoHS |
| Maintenance | Rinse with fresh water after use |
| Cleaning | Clean strainer and impeller regularly |
| Safety | Do not operate without water for over 1 minute |
| Spare Parts | Impeller and seal are user-replaceable |
| Repairability | Easy access to serviceable components |
Frequently Asked Questions - SP250 Global Water
How do I install the SP250 pump?
Place the pump on a stable surface, connect a discharge hose, fully submerge it in water, then plug it into a suitable power outlet. Ensure the pump is upright and the intake is clear.
Can I use the pump for dirty water?
Yes, the SP250 can handle particles up to 5mm in diameter, making it suitable for slightly dirty water, but it is not designed for sewage or heavily contaminated wastewater.
What is the maximum depth of submersion?
The pump is rated IPX8 and can be submerged up to 5 meters below the water surface for continuous operation.
Why does the pump stop automatically?
The pump has a thermal overload protector and a dry-run sensor. It will shut off automatically if the motor overheats or if the water level drops too low to protect the pump from damage.
How do I clean the pump?
Disconnect the power, remove the pump from water, and rinse it with fresh water. Clean the strainer and impeller to remove debris. Do not use aggressive chemicals.
What accessories are included with the SP250?
The package includes the pump, a 1-inch hose adapter, and a user manual. Additional hoses and fittings may be purchased separately.
Is the pump suitable for saltwater?
No, the SP250 is made of stainless steel and thermoplastic, but it is not recommended for saltwater use as corrosion may occur over time. Use it for freshwater only.
How do I replace the impeller?
Unscrew the bottom plate of the pump, carefully remove the old impeller, and press the new one into place. Always disconnect power and ensure safety precautions before servicing.
What should I do if the pump runs but does not deliver water?
Check for blockages in the intake or hose, ensure the pump is primed and fully submerged, and verify the discharge hose is not kinked. Also check that the impeller moves freely.
Is the pump energy efficient?
With a 250W motor, the SP250 offers a good balance of power and efficiency, moving up to 1200 liters per hour while keeping energy consumption low for a pump of this size.
User questions about SP250 Global Water
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pump in PDF format for free! Find your manual SP250 - Global Water and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SP250 by Global Water.
USER MANUAL SP250 Global Water
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Global Water
Model : SP250
Category : Pump