OKC613RWH - Range hood Hansa - Free user manual and instructions
Find the device manual for free OKC613RWH Hansa in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Hansa |
| Model | OKC613RWH |
| Product Type | Wall-mounted range hood |
| Color | White |
| Width | 60 cm |
| Depth | Approximately 50 cm |
| Height | Approximately 15 cm |
| Weight | Approximately 8.5 kg |
| Rated Voltage | 220–240 V |
| Frequency | 50 Hz |
| Number of Speeds | 3 |
| Control Type | Push-button |
| Lighting | 1 × LED bulb (1.5 W) |
| Grease Filter | Reusable aluminum mesh |
| Extraction Capacity | 360 m³/h |
| Noise Level | Approximately 55–65 dB |
| Exhaust Duct Diameter | 120 mm |
| Installation Type | Under-cabinet or wall-mounted |
| Maintenance | Clean grease filter every 2–3 weeks |
| Safety Features | Thermal cutout, overload protection |
| Spare Parts | Available from Hansa after-sales service |
Frequently Asked Questions - OKC613RWH Hansa
How do I install the Hansa OKC613RWH range hood?
Ensure the wall or cabinet can support the hood's weight. Use the included mounting template to mark the holes. Drill, insert wall plugs, and fix the hood securely. Connect the exhaust duct (diameter 120 mm) if in extraction mode. Finally, connect the electrical supply with a rated voltage of 220–240 V.
How often should I clean the grease filter?
The aluminum grease filter should be cleaned every 2–3 weeks depending on cooking frequency. Remove it, wash with warm soapy water or in the dishwasher at low temperature, and dry before reinstalling.
Can the OKC613RWH be used in recirculation mode?
Yes, the hood can be used in recirculation mode. You will need an optional carbon filter (not included) to absorb odors. Mount the carbon filter on the motor, then redirect the exhaust outlet back into the room.
How do I replace the LED light?
Make sure the hood is switched off and unplugged. Remove the bulb cover by gently prying it off. Replace the LED bulb with a compatible 1.5 W LED module. Reattach the cover and restore power.
What is the recommended maintenance schedule?
Clean the grease filter every 2–3 weeks. Replace the carbon filter every 3–6 months if you use recirculation mode. Wipe the exterior with a soft damp cloth regularly. Check the duct and fan for any blockages periodically.
Why is my range hood noisy during operation?
Check if the duct is blocked or crushed, which can cause rattling. Ensure the hood is securely mounted. A dirty filter can also reduce airflow and increase noise. Clean or replace the filters as needed.
How do I connect the exhaust duct?
Connect a 120 mm exhaust duct to the hood's outlet flange. Use a suitable clamp to secure it. Ensure the duct is as short and straight as possible to maximize extraction efficiency.
Can I install the hood as a built-in appliance?
Yes, the OKC613RWH is designed for under-cabinet installation. Refer to the installation manual for exact clearance dimensions. It fits a standard 60 cm cabinet width.
How do I reset the filter saturation indicator?
If your model has a filter saturation indicator, press and hold the speed selection button for 3 seconds until the indicator light turns off. This resets the timer.
What is the extraction capacity of this range hood?
The Hansa OKC613RWH provides a maximum extraction capacity of 360 m³/h, which is suitable for kitchens up to 15–20 m². The hood offers three fan speeds to adjust airflow.
User questions about OKC613RWH Hansa
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual OKC613RWH - Hansa and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. OKC613RWH by Hansa.
USER MANUAL OKC613RWH Hansa
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hansa
Model : OKC613RWH
Category : Range hood