PHR 410 II - Loudspeaker PEAVEY - Free user manual and instructions
Find the device manual for free PHR 410 II PEAVEY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Professional Passive Loudspeaker |
| Brand | Peavey |
| Model | PHR 410 II |
| Driver Configuration | 4 x 10-inch woofers |
| Power Handling (Program) | 400 W |
| Power Handling (Peak) | 800 W |
| Impedance | 8 ohms |
| Sensitivity | 99 dB @ 1W/1m |
| Frequency Response | 60 Hz - 18 kHz |
| Input Connections | 2 x 1/4" Jack, 1 x Speakon |
| Enclosure Material | Plywood with textured black coating |
| Grille | Perforated steel with foam backing |
| Handles | 2 ergonomic side handles |
| Pole Mount | 35 mm socket for speaker stand |
| Dimensions (H x W x D) | 24" x 24" x 18" (610 x 610 x 457 mm) |
| Weight | 55 lbs (25 kg) |
| Recommended Amplifier Power | 200 - 800 W RMS per channel |
| Operating Environment | Indoor and protected outdoor use |
| Cleaning Instructions | Wipe with a soft dry cloth; do not use solvents |
| Safety Features | Recessed handles, slip-resistant feet |
| Spare Parts Availability | Drivers, grilles, and hardware replaceable via Peavey service centers |
Frequently Asked Questions - PHR 410 II PEAVEY
What is the power handling of the Peavey PHR 410 II?
The PHR 410 II is rated for 400 watts program and 800 watts peak. This makes it compatible with amplifiers delivering between 200 and 800 watts RMS per channel.
How do I connect the PHR 410 II to my amplifier?
Use a high-quality speaker cable with either a 1/4" jack or a Speakon connector. Connect one end to the amplifier output and the other to the speaker input. Ensure the amplifier is powered off before making connections.
Can the PHR 410 II be used as a floor monitor?
Yes, the PHR 410 II features a trapezoidal cabinet design and a 35 mm pole socket, allowing it to be positioned either upright on stands or angled as a stage monitor.
What is the best way to clean the speaker cabinet?
To clean the cabinet, use a soft, dry cloth. Avoid abrasive cleaners, solvents, or water, as they may damage the coating or the internal components.
Does the speaker come with mounting hardware?
The speaker includes a 35 mm pole mount socket, but the threaded adapter and speaker stand are not included. These are widely available from professional audio retailers.
How do I protect the speaker from damage?
Always match the speaker's impedance and power rating with your amplifier. Avoid clipping the amplifier, and ensure the speaker is securely positioned to prevent falls or vibrations.
Can the drivers be replaced?
Yes, the 10-inch woofers are serviceable. Replacement parts are available through Peavey authorized service centers. For best performance, use genuine Peavey components.
What impedance is the speaker?
The PHR 410 II has a nominal impedance of 8 ohms. This is suitable for most professional amplifiers and allows multiple speakers to be paralleled with proper calculations.
What kind of speaker cable should I use?
Use a low-resistance, high-quality speaker cable (e.g., 12 gauge) for runs up to 50 feet. For longer runs, use heavier gauge (10 gauge) to minimize power loss.
Is the speaker suitable for outdoor use?
The PHR 410 II can be used in protected outdoor environments, such as covered stages, but should be shielded from direct rain or extreme moisture. Weather exposure may damage components.
User questions about PHR 410 II PEAVEY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual PHR 410 II - PEAVEY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PHR 410 II by PEAVEY.
USER MANUAL PHR 410 II PEAVEY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PEAVEY
Model : PHR 410 II
Category : Loudspeaker