PLRGSW104BK - Loudspeaker Pyle - Free user manual and instructions
Find the device manual for free PLRGSW104BK Pyle in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Audio Subwoofer |
| Speaker Size | 10 inches |
| Impedance | 4 Ohm (dual 4 Ohm voice coil) |
| Peak Power Handling | 1200 Watts |
| RMS Power Handling | 600 Watts |
| Frequency Response | 25Hz - 1.8kHz |
| Sensitivity | 90 dB (1W/1m) |
| Cone Material | Non-Pressed Paper with Polypropylene Coating |
| Surround Material | Rubber Edge |
| Voice Coil Size | 2 inch Aluminum 4-Layer Voice Coil |
| Magnet Type | High-Grade Ferrite / Double Magnet |
| Mounting Depth | 5.9 inches |
| Cutout Diameter | 9.1 inches |
| Basket Material | Steel with Machined Flat Bottom |
| Terminal Type | Gold Screw-Type Push Terminals |
| Recommended Enclosure | Sealed: 0.6 cu ft - 0.8 cu ft; Ported: 1.2 cu ft with 4" port |
| Sealed Box Frequency Response | 28Hz - 300Hz |
| Ported Box Frequency Response | 25Hz - 250Hz |
| Shipping Weight | 14.5 lbs |
| Product Dimensions | 10.2 x 10.2 x 7.1 inches |
| Color | Black Basket / Black Cone |
Frequently Asked Questions - PLRGSW104BK Pyle
What is the recommended amplifier power for this subwoofer?
The Pyle PLRGSW104BK can handle up to 600 Watts RMS and 1200 Watts peak. It is best paired with an amplifier delivering between 400 and 600 Watts RMS at 4 Ohms to ensure optimal performance without distortion.
Can I use this subwoofer in a sealed enclosure?
Yes, it works well in sealed boxes. A sealed enclosure with an internal volume of 0.6 to 0.8 cubic feet is recommended for accurate bass and a tight response.
What size cutout is required for mounting?
The mounting cutout diameter is 9.1 inches, while the overall diameter is 10.2 inches. Always check the mounting depth of 5.9 inches to ensure it fits in your vehicle.
Does this speaker come with grilles or mounting hardware?
No, the subwoofer is sold as a single unit without grilles. You will need to purchase mounting screws separately (typically #8 x 1 inch). The basket has standard mounting ears for a secure fit.
What is the impedance of the voice coils?
It uses a dual 4 Ohm voice coil configuration, which allows wiring in parallel for a 2 Ohm load or in series for an 8 Ohm load. This flexibility helps match your amplifier's stability.
How should I break in this new subwoofer?
Play it at low volumes for the first 10-15 hours, gradually increasing the volume. This allows the surround and suspension to loosen up, improving low-frequency excursion and overall sound quality.
Can I install this subwoofer in a ported enclosure?
Yes, a ported box adds more output and deeper bass. Use a vented enclosure with 1.2 cubic feet of internal volume and a 4 inch port (tuned around 35-40 Hz) for best results.
What type of music does this subwoofer perform best with?
It excels with genres that require punchy, deep bass such as rap, hip-hop, EDM, and rock. Its frequency response of 25 Hz to 1.8 kHz provides strong low-end impact.
How do I wire the dual voice coils correctly?
If your amplifier is 4 Ohm mono stable, wire the coils in parallel to present a 2 Ohm load. If it is only 2 Ohm mono stable, wire in series for 8 Ohms. Always match the final impedance to your amp's minimum rating.
How should I clean and maintain this subwoofer?
Use a soft, dry cloth to remove dust from the cone and surround. Never use water or cleaning chemicals, as they can damage the paper cone and rubber surround. Ensure the subwoofer is kept away from excessive humidity.
User questions about PLRGSW104BK Pyle
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual PLRGSW104BK - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PLRGSW104BK by Pyle.
USER MANUAL PLRGSW104BK Pyle
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Pyle
Model : PLRGSW104BK
Category : Loudspeaker