PWPBT10GN - Loudspeaker Pyle - Free user manual and instructions
Find the device manual for free PWPBT10GN Pyle in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Bluetooth PA Speaker |
| Brand | Pyle |
| Model | PWPBT10GN |
| Color | Green and Black |
| Speaker Size | 10-inch low-frequency driver |
| Peak Power Output | 400 Watts |
| RMS Power | 100 Watts |
| Bluetooth Version | 4.2 with 45 ft wireless range |
| Battery Type | Rechargeable 12V / 7Ah sealed lead-acid |
| Playback Time | Up to 3 hours at moderate volume |
| Charging Time | Approximately 5 hours |
| Audio Inputs | 1/4 inch mic/line, 1/4 inch guitar, 1/8 inch aux |
| Media Playback | USB flash drive and SD card slot |
| Radio | Built-in FM tuner |
| Frequency Response | 28 Hz – 18 kHz |
| Dimensions (W x D x H) | 16.9 x 15.7 x 25.6 inches |
| Weight | 22.5 lbs |
| Power Supply | AC 100–240V, 60/50 Hz |
| Included Accessories | Wireless microphone, remote control, AC adapter |
| Maintenance | Wipe exterior with soft dry cloth; keep dust and moisture away |
| Safety Precautions | Do not expose to rain or water; avoid blocking ventilation |
Frequently Asked Questions - PWPBT10GN Pyle
How do I pair my phone with the PWPBT10GN via Bluetooth?
Turn on the speaker and set it to Bluetooth mode by pressing the Mode button until the indicator flashes. On your phone, enable Bluetooth and search for PWPBT10GN from the available devices. Select it to pair. No passcode is required.
How should I charge the built-in battery?
Use the included AC adapter to connect the speaker to a power outlet. The charging indicator shows the status: red while charging, green when fully charged. A full charge takes about 5 hours.
Can I use the speaker while it is charging?
Yes, the PWPBT10GN can play audio while connected to AC power. This is useful for long events without draining the internal battery.
How do I connect a microphone or guitar to the speaker?
Plug a microphone into the MIC input and an electric guitar into the Guitar input using 1/4-inch cables. Use the volume controls on the corresponding channels to adjust levels independently.
How can I play music from a USB drive or SD card?
Insert a USB flash drive or SD card with MP3 files into the appropriate slot. Press the Mode button to select USB or SD mode. Tracks will play automatically and can be controlled via the buttons or remote.
How do I set up the FM radio?
Press the Mode button until FM radio is active. Then press the Play/Pause button to perform an automatic scan and store available stations. Use the Next and Previous buttons to cycle through them.
What is the maximum Bluetooth range?
The Bluetooth range is up to 45 feet (about 15 meters) in open space. Walls and obstacles may reduce this range, so keep the device close for a stable connection.
What should I do if the speaker freezes or does not respond?
Turn off the speaker and disconnect it from power for 30 seconds. Then reconnect and power on. If the issue persists, perform a factory reset by holding the Mode button for 5 seconds, or use the reset hole if available.
How do I clean and maintain the speaker?
Wipe all exterior surfaces with a soft, dry cloth. Do not use abrasive cleaners or solvents. Keep the speaker away from dust, moisture, and extreme temperatures to ensure long-term performance.
Can the battery be replaced?
The internal battery is replaceable by a qualified technician. Contact Pyle support or an authorized service center for replacement parts and service to ensure safe installation.
User questions about PWPBT10GN Pyle
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual PWPBT10GN - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PWPBT10GN by Pyle.