ECT-906 - Doorbell Milectric - Free user manual and instructions
Find the device manual for free ECT-906 Milectric in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Doorbell |
| Brand | Milectric |
| Model | ECT-906 |
| Power Source | 2 x AAA batteries (not included) |
| Operating Voltage | 3V DC |
| Wireless Range | Up to 150 meters (open area) |
| Number of Melodies | 50 selectable chimes |
| Volume Control | Yes, adjustable |
| Frequency | 433 MHz |
| Waterproof Rating | IP44 (splashproof) |
| Weight | 120 g (transmitter + receiver) |
| Receiver Dimensions | 80 x 80 x 30 mm |
| Transmitter Dimensions | 45 x 85 x 20 mm |
| LED Indicator | Yes, flashes on activation |
| Operating Temperature | -10°C to 45°C |
| Installation | Mounting kit included, no wiring required |
| Maintenance | Clean with a soft dry cloth |
| Safety | Low voltage, safe for indoor/outdoor use |
| Spare Parts | Available upon request via customer service |
| Certifications | CE, RoHS |
| Package Contents | 1 transmitter, 1 receiver, mounting screws, adhesive tape |
Frequently Asked Questions - ECT-906 Milectric
How do I install the Milectric ECT-906 doorbell?
The installation is tool-free. Mount the transmitter (button) near your door using the included screws or adhesive tape, and plug the receiver into a power socket. Press the button to test the link.
Can I add additional receivers?
Yes, the ECT-906 supports multi-receiver pairing. Simply press the pairing button on the new receiver and then press the doorbell button once to sync them.
How long do the batteries last?
With normal use (about 20 presses per day), the transmitter batteries can last up to 12 months. The receiver is mains-powered, so no battery is needed for it.
What is the wireless range?
The operating range is up to 150 meters in open areas. In a typical home with thick walls, expect around 50-70 meters of reliable coverage.
Is the doorbell waterproof?
The transmitter has an IP44 rating, meaning it is protected against splashing water. The receiver should be kept indoors in a dry location.
How can I change the melody?
Press the melody selection button on the receiver repeatedly to cycle through the 50 built-in chimes. The receiver will play a preview each time until you find your preferred tune.
What should I do if the doorbell is not working?
First, check the transmitter batteries and replace them if needed. Ensure the receiver is plugged in and the power is on. If the issue persists, re-pair the devices by pressing the pairing button on the receiver and then the transmitter button.
Does the doorbell have a flashing LED?
Yes, the receiver has an LED indicator that flashes when the doorbell button is pressed, useful in noisy environments or for the hearing impaired.
Can I use it without wiring?
Absolutely. The ECT-906 is a fully wireless doorbell; the transmitter runs on batteries and the receiver simply plugs into a wall outlet, with no hardwiring necessary.
How do I clean and maintain the device?
Wipe the transmitter and receiver with a soft, dry cloth to remove dust. Avoid using water, solvents, or abrasive cleaners. Check the transmitter batteries periodically to prevent corrosion.
User questions about ECT-906 Milectric
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Doorbell in PDF format for free! Find your manual ECT-906 - Milectric and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ECT-906 by Milectric.
USER MANUAL ECT-906 Milectric
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Milectric
Model : ECT-906
Category : Doorbell