Bellini

BAF902 - Range hood Bellini - Free user manual and instructions

Find the device manual for free BAF902 Bellini in PDF.

📄 1 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Bellini BAF902 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Range Hood
Brand Bellini
Model BAF902
Mounting Type Wall-mounted
Design Stainless steel with tempered glass
Controls Electronic push buttons
Number of Speeds 3
Max Airflow 650 m³/h
Noise Level (Max) 65 dB
Lighting 2 x 1.5 W LED
Grease Filter Type Aluminum mesh, dishwasher safe
Number of Grease Filters 3
Carbon Filter Available separately for recirculation mode
Duct Outlet Diameter 150 mm
Exhaust Type Ducted / Recirculating
Width 90 cm
Depth 48 cm
Height (Body) 55 cm
Chimney Height 70–115 cm telescopic
Weight 15 kg
Power Supply 220–240 V, 50 Hz
Power Consumption 220 W
Safety Features Thermal cut-out, motor overload protection
Maintenance Wipe exterior with damp cloth; wash grease filters regularly
Spare Parts Grease filters, carbon filters, and LED modules available

Frequently Asked Questions - BAF902 Bellini

How do I turn on the range hood?
Use the electronic control panel on the front. Press the Power button to switch on the motor. Select your desired speed (1 to 3) using the speed selector. Press Power again to turn off.
How often should I clean the grease filters?
For optimal performance, clean the aluminum grease filters every 1–2 months depending on usage. The filters are dishwasher safe or can be soaked in warm soapy water. Regular cleaning prevents grease buildup and reduces fire risk.
Can I use the range hood in recirculation mode?
Yes, the hood can be used in recirculation mode by installing a carbon filter (sold separately). The carbon filter absorbs odors. This mode is ideal when ducting outside is not possible.
How do I replace the carbon filter?
First, disconnect the hood from the power supply. Remove the grease filters to access the carbon filter unit. Replace the old carbon filter with a new one (same model), then reinstall the grease filters. The process takes only a few minutes.
The range hood is noisy, what should I do?
Check if the ductwork is correctly sized (minimum 150 mm) and not blocked. Ensure the filters are clean; dirty filters reduce airflow and increase noise. Also, check that the hood is securely mounted to the wall to avoid vibrations.
How do I clean the exterior of the range hood?
Use a soft cloth with mild detergent or a stainless steel cleaner. Always wipe in the direction of the brushed metal finish to avoid streaking. Avoid abrasive pads or harsh chemicals that can damage the surface.
What size duct pipe do I need?
The recommended duct diameter is 150 mm. Using a smaller duct will reduce airflow and increase noise. For best results, keep the duct as short and straight as possible.
Is the lighting replaceable?
Yes, the hood is equipped with LED modules that can be replaced in case of failure. Consult the manual for the correct replacement part and installation procedure. Always switch off the power before replacing.
How do I reset the filter alarm?
If your model has a filter saturation indicator, it will light up when filters need cleaning. After cleaning, press and hold the reset button (if available) or switch the hood off and on again to reset the alarm. Check your manual for exact instructions.
Can I install this hood over an island?
No, the Bellini BAF902 is designed as a wall-mounted range hood. For island installations, a ceiling-mounted model is required. Always check the manufacturer's installation guidelines.

User questions about BAF902 Bellini

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Range hood in PDF format for free! Find your manual BAF902 - Bellini and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BAF902 by Bellini.

USER MANUAL BAF902 Bellini

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Bellini

Model : BAF902

Category : Range hood