AI T380-A - Power tool HILTI - Free user manual and instructions
Find the device manual for free AI T380-A HILTI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Impact driver |
| Brand | Hilti |
| Model | AI T380-A |
| Power source | Cordless (18V Li-ion) |
| Battery voltage | 18 V |
| Max torque | 380 Nm |
| No-load speed | 0 - 2,800 rpm |
| Impact rate | 0 - 3,200 bpm |
| Tool holder | 1/4" hex |
| Battery type | Li-ion 18V |
| Weight (with battery) | 1.8 kg |
| Dimensions (L x W x H) | 200 x 80 x 150 mm |
| Charging time | 45 minutes |
| LED work light | Yes |
| Motor type | Brushless |
| Variable speed trigger | Yes |
| Overload protection | Yes |
| Vibration level | 3.5 m/s² |
| Sound pressure level | 92 dB(A) |
| Operating temperature | -10°C to +50°C |
| Housing | Fiberglass-reinforced plastic |
| Maintenance | Clean vents and locking mechanism regularly |
| Safety features | Lock-on switch, anti-slip handle |
Frequently Asked Questions - AI T380-A HILTI
How do I change the bit on my Hilti AI T380-A?
Turn the locking sleeve counterclockwise, insert the bit fully, and release the sleeve. Ensure the bit locks securely before use.
What is the maximum torque of the AI T380-A?
The device delivers 380 Nm of maximum torque, ideal for heavy-duty fastening applications.
How long does the battery take to charge?
Using the standard charger, the 18V Li-ion battery reaches a full charge in approximately 45 minutes.
Can I use the tool at low temperatures?
The operating temperature range is -10°C to +50°C. For best performance, allow the battery to warm up to around 20°C before heavy use.
How should I clean the impact driver?
Use a dry cloth to wipe the housing. Keep air vents and the tool holder free of dust. Do not use water or compressed air for cleaning.
What safety precautions should I take?
Always wear eye protection and gloves. Keep hands away from rotating parts. Use the lock-on switch when continuous operation is needed.
How do I know when the battery is low?
The tool's LED light blinks or the tool slows down. Charge the battery immediately to avoid deep discharge.
Can I use any 18V Hilti battery?
Yes, use Hilti 18V Li-ion batteries. Ensure they are compatible with the B22 series for optimal performance.
What does the overload protection do?
It prevents the motor and battery from overheating by temporarily cutting off power. Wait a few seconds before resuming work.
How do I store the device properly?
Store in a dry place at temperatures between 0°C and 40°C. Remove the battery for long-term storage to preserve battery life.
User questions about AI T380-A HILTI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Power tool in PDF format for free! Find your manual AI T380-A - HILTI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AI T380-A by HILTI.
USER MANUAL AI T380-A HILTI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HILTI
Model : AI T380-A
Category : Power tool