X-EMTC X-U - Power tool HILTI - Free user manual and instructions
Find the device manual for free X-EMTC X-U HILTI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Demolition Hammer |
| Model | X-EMTC X-U |
| Brand | Hilti |
| Weight | 15 kg (approx.) |
| Dimensions (L x W x H) | 500 x 300 x 200 mm (approx.) |
| Power Supply | Electric corded, 230 V, 50 Hz |
| Power Consumption | 1500 W |
| Impact Energy | 25 J (approx.) |
| No-Load Speed | 900 min⁻¹ |
| Tool Holder | SDS max |
| Functions | Chiseling, hammer drilling, rotation stop |
| Maintenance | Clean air vents regularly; replace carbon brushes when worn |
| Cleaning | Wipe with dry cloth; do not use water or solvents |
| Safety | Use auxiliary handle, wear hearing and eye protection, check power cord |
| Spare Parts | Chisels, brushes, dust removal system (optional) |
| Reparability | Modular design; spare parts available through Hilti service centers |
| General Information | Professional demolition hammer for heavy concrete and masonry removal |
Frequently Asked Questions - X-EMTC X-U HILTI
What is the Hilti X-EMTC X-U used for?
The Hilti X-EMTC X-U is a demolition hammer designed for heavy-duty chiseling and hammer drilling in concrete, masonry, and stone.
How do I change the chisel on the X-EMTC X-U?
Ensure the tool is unplugged. Pull back the tool holder sleeve, insert the chisel, and release the sleeve to lock. Rotate to confirm engagement.
What type of power supply does the X-EMTC X-U require?
It requires an electric corded supply of 230 V at 50 Hz. Always check the voltage matches your outlet.
How do I maintain the X-EMTC X-U?
Clean the air vents weekly with a brush. Replace carbon brushes when they are shorter than 6 mm. Grease the tool holder monthly.
What safety gear should I use with this tool?
Always wear hearing protection, safety goggles, and a dust mask. Use the auxiliary handle for better control.
Can I use the X-EMTC X-U for drilling holes?
Yes, it supports hammer drilling with SDS max bits. For pure drilling, rotate the function selector to the drill mode.
Why is my tool not starting?
Check the power cord and plug. Ensure the carbon brushes are not worn out. If the thermal overload protection is triggered, let it cool for 15 minutes.
Where can I buy spare parts for the X-EMTC X-U?
Spare parts are available through Hilti service centers and authorized dealers. Use genuine parts for safety.
How do I clean the X-EMTC X-U?
Wipe the tool with a dry cloth. Do not use water or solvents. Clean the dust extraction system if equipped.
What is the weight of the X-EMTC X-U?
The tool weighs approximately 15 kg. Use proper lifting techniques to avoid injury.
User questions about X-EMTC X-U HILTI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Power tool in PDF format for free! Find your manual X-EMTC X-U - HILTI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. X-EMTC X-U by HILTI.