FCS-5062 - Security Camera LEVELONE - Free user manual and instructions
Find the device manual for free FCS-5062 LEVELONE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IP Security Camera |
| Brand | LevelOne |
| Model | FCS-5062 |
| Image Sensor | 1/2.7" progressive scan CMOS |
| Resolution | 1920 x 1080 (Full HD) |
| Lens | Fixed focal length, 3.6mm, F2.0 |
| Field of View | 78° diagonal |
| Night Vision | IR LEDs with up to 20m range |
| Video Compression | H.264, MJPEG |
| Network Interface | 10/100 Mbps Ethernet (RJ-45) |
| Power Supply | PoE IEEE 802.3af or 12V DC |
| Power Consumption | Max 7W |
| Operating Temperature | -10°C to 50°C |
| Ingress Protection | IP66 (outdoor-rated) |
| Dimensions (W x D x H) | 70 mm x 60 mm x 110 mm |
| Weight | 250 g |
| Event Management | Motion detection, tampering alarm |
| Storage | MicroSD card slot (up to 128 GB) |
| Protocols | IPv4, TCP/IP, HTTP, RTSP, ONVIF |
| Maintenance | Clean lens with soft dry cloth; check connections periodically |
| Security | Password protection, HTTPS encryption, user access levels |
| Repairability | Spare parts available; user-replaceable microSD card and lens cover |
| General Information | Supports firmware upgrade via web interface |
Frequently Asked Questions - FCS-5062 LEVELONE
How do I reset the camera to factory defaults?
Press and hold the reset button on the back of the device for 10 seconds using a paperclip. The camera will reboot and restore all settings to factory defaults.
Can I access the camera remotely from my smartphone?
Yes, the FCS-5062 supports ONVIF and can be viewed through the manufacturer's app or any third-party ONVIF-compatible app. You will need to set up port forwarding on your router or use a cloud service.
Does this camera support PoE (Power over Ethernet)?
Yes, the device is compliant with IEEE 802.3af standard, allowing both power and data to be delivered over a single Ethernet cable, eliminating the need for a separate power adapter.
What is the maximum microSD card capacity supported?
The camera supports microSD cards up to 128 GB for local recording. Use a high-quality card with at least Class 10 for reliable performance.
How do I set up motion detection alerts?
Access the camera's web interface, go to the Event Settings page, enable motion detection, and configure the sensitivity and alerts. You can receive email notifications or have the camera upload snapshots to an FTP server.
Is the camera suitable for outdoor use?
Yes, the FCS-5062 is rated IP66, meaning it is dust-tight and protected against powerful water jets, making it suitable for outdoor installation.
What video recording formats are supported?
The camera supports H.264 and MJPEG formats. H.264 is recommended for efficient storage and bandwidth usage, while MJPEG is useful for compatibility with older systems.
Can I view the camera feed through a web browser?
Yes, you can connect to the camera's IP address using a compatible web browser. Use the bundled software or login via HTTP to view the live feed and adjust settings.
How often should I clean the camera lens?
Clean the lens when dust or smudges affect image clarity. Use a soft, dry microfiber cloth to gently wipe the lens. Avoid using liquids or abrasive materials.
What should I do if the camera is not connecting to the network?
Check all Ethernet connections, ensure the camera is powered on, and verify that the IP address is correctly assigned. Restart the router if needed. Also confirm that your network's DHCP is active or set a static IP address manually.
User questions about FCS-5062 LEVELONE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual FCS-5062 - LEVELONE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FCS-5062 by LEVELONE.