FCS-3063 - Security Camera LEVELONE - Free user manual and instructions
Find the device manual for free FCS-3063 LEVELONE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | IP Security Camera |
| Brand | LevelOne |
| Model | FCS-3063 |
| Category | Security Camera |
| Image sensor | 1/2.7-inch CMOS |
| Resolution | 1920 x 1080 (Full HD) |
| Lens | 3.6mm fixed lens, F2.0 |
| Night vision | IR LEDs with 30m range |
| Weatherproof rating | IP66-rated housing |
| Network connection | 10/100 Mbps Ethernet (RJ-45) |
| Power supply | PoE IEEE 802.3af or 12V DC |
| Dimensions | 180 x 65 x 65 mm |
| Weight | 350 g |
| Operating temperature | -20°C to 50°C |
| Main functions | Motion detection, remote viewing, two-way audio |
| Mounting | Wall or ceiling mounting bracket included |
| Maintenance | Clean lens with dry soft cloth; keep housing sealed |
| Security | Password protection, HTTPS encryption |
| Spare parts | Replacement IR LED board, lens module |
| Repairability | Modular design allows component replacement |
| General information | Suitable for indoor and outdoor use |
Frequently Asked Questions - FCS-3063 LEVELONE
How do I connect the FCS-3063 to my network?
Connect the camera to your router using an Ethernet cable, then plug in the power adapter or use PoE. Assign a static IP address via the included software or DHCP.
Can I view the camera remotely from my smartphone?
Yes, install the LevelOne mobile app and scan the QR code on the camera. You can access live video and receive alerts over the internet.
The camera does not turn on. What should I check?
Make sure the power supply is connected correctly. If using PoE, verify that your switch provides IEEE 802.3af power. Also, check the power cable for damage.
How far can the IR night vision see?
The built-in IR LEDs provide clear video up to 30 meters in complete darkness.
Is the camera waterproof?
Yes, the FCS-3063 has an IP66-rated weatherproof housing, suitable for outdoor installation in rain or snow.
How do I reset the camera to factory defaults?
Press and hold the reset button on the device for 10 seconds. The camera will reboot and restore all default settings including IP address.
Can I access the camera through a web browser?
Yes, type the camera's IP address into your web browser. You can view live video and configure settings using the built-in web interface.
What is the maximum resolution of the FCS-3063?
The camera captures Full HD 1080p video at 1920x1080 pixels, with a frame rate of up to 30 fps.
How do I update the firmware?
Download the latest firmware from the LevelOne website, then go to the camera's maintenance section in the web interface and upload the file.
What should I do if the image is blurry?
Clean the lens with a soft cloth, or adjust the focus ring if manual focus is available. Also check that the camera is not obstructed by dirt or condensation.
User questions about FCS-3063 LEVELONE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual FCS-3063 - LEVELONE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FCS-3063 by LEVELONE.
USER MANUAL FCS-3063 LEVELONE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : LEVELONE
Model : FCS-3063
Category : Security Camera