242088-6 - Stapler MAKITA - Free user manual and instructions
Find the device manual for free 242088-6 MAKITA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Stapler |
| Brand | Makita |
| Model | 242088-6 |
| Intended use | Fixing wood, upholstery, insulation, and similar materials |
| Power source | Compressed air |
| Fastener width | 11.5 mm crown staples (type 100) |
| Fastener length | 10 to 14 mm |
| Fastener capacity | 100 staples |
| Operating pressure | 70 to 100 psi (4.9 to 6.9 bar) |
| Air inlet | 1/4 in NPT |
| Loading | Quick-release magazine |
| Weight | 1.4 kg (3.1 lbs) |
| Dimensions (L x W x H) | 245 x 65 x 205 mm |
| Housing | Aluminium body with rubberised grip |
| Exhaust system | Adjustable, deflectable air exhaust |
| Jam release | Tool-free jam release mechanism |
| Trigger mode | Sequential (single-shot) |
| Safety | Contact safety trip |
| Dry-fire prevention | Prevents firing when magazine is empty |
| Maintenance | Clean and lubricate piston and O-rings regularly |
| Spare parts | All wearing parts available as Makita original spare parts |
Frequently Asked Questions - 242088-6 MAKITA
What size of staples does the Makita 242088-6 use?
The stapler accepts 11.5 mm crown staples, type 100, with a length range of 10 to 14 mm. Always use original Makita staples or equivalent high-quality staples to avoid jams.
What air pressure is required to operate the stapler?
Set the compressor regulator to 70 to 100 psi (4.9 to 6.9 bar). Start at 70 psi and increase if the staple is not fully inserted into the workpiece.
How do I clear a jam in the Makita 242088-6?
Disconnect the tool from the air supply, open the quick-release magazine, remove any bent staple, and inspect the driver channel. The tool has a tool-free jam release for quick access.
Does the stapler use a special lubrication?
Yes, add a few drops of pneumatic tool oil to the air inlet before each work session. Clean the magazine and driver blade regularly to keep the tool reliable.
Can this stapler fix upholstery fabric?
Yes, it is designed for upholstery, fabric, plywood, and thin trim. Select the correct staple length for the thickness of the material.
Is the Makita 242088-6 safe to use?
It has a contact safety trip that prevents accidental firing. Never bypass the safety, wear eye protection, and disconnect the air when not in use.
How many staples can the magazine hold?
The magazine holds up to 100 staples. A dry-fire prevention mechanism stops the tool when the magazine is empty.
Can I use the stapler with any air compressor?
It works with most compressors providing 70 to 100 psi and at least 2.4 cfm at the set pressure. Use a 1/4 in NPT air coupler.
What should I do if the staples are not fully driven?
Check the air pressure, that the staples are loaded correctly, and that the front nose and magazine are clean. Increase pressure gradually within the specified range.
Where can I find replacement parts for the 242088-6?
Contact an Makita service center or authorized dealer. Use your model number 242088-6 and refer to the parts diagram in the manual to order original spare parts.
User questions about 242088-6 MAKITA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Stapler in PDF format for free! Find your manual 242088-6 - MAKITA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 242088-6 by MAKITA.
USER MANUAL 242088-6 MAKITA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MAKITA
Model : 242088-6
Category : Stapler