DST111 - Stapler MAKITA - Free user manual and instructions
Find the device manual for free DST111 MAKITA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Pneumatic stapler |
| Brand | Makita |
| Model | DST111 |
| Operating pressure | 4 to 8 bar |
| Staple type | Collated staples from 10 to 50 mm |
| Magazine capacity | 100 staples |
| Dimensions (L x W x H) | 270 x 90 x 170 mm |
| Weight | 1.2 kg |
| Power source | Compressed air |
| Air fitting | 1/4" NPT |
| Main function | Stapling wood, plastic, etc. |
| Depth adjustment | Tool-less adjustment dial |
| Safety device | Anti-kickback safety trigger |
| Protective nose | Non-mar rubber nose |
| Maintenance | Regular cleaning of the magazine and lubrication |
| Cleaning | Blow with compressed air, do not immerse |
| Spare parts | Available: seals, springs, pusher |
| Repairability | Repairability score 7/10 |
| Warranty | 1 year (except wear parts) |
| Application | Carpentry, upholstery, finishing work |
| Noise level | 85 dB(A) |
| Vibration | < 2.5 m/s² |
| Package contents | Stapler, case, hex key, manual |
Frequently Asked Questions - DST111 MAKITA
What type of staples to use with the Makita DST111?
Use collated staples of type 18 or 20 gauge, with a length between 10 and 50 mm. Refer to the manual for exact dimensions.
How to load staples in the Makita DST111?
Pull the pusher back, insert a strip of staples into the magazine, then release the pusher. Ensure the staples are properly aligned.
How to adjust the driving depth?
Turn the adjustment dial located at the front of the tool. Rotating clockwise increases depth, counterclockwise decreases it.
Why is the stapler not working?
Check the air pressure (4-8 bar), the staple supply, and whether the safety lock is properly depressed. If the problem persists, disassemble and clean the mechanism.
What compressed air pressure is recommended?
The operating pressure is between 4 and 8 bar. Too low pressure reduces power, too high may damage the tool.
How to maintain the Makita DST111 stapler?
Regularly clean the magazine and moving parts with a dry cloth or compressed air. Apply a few drops of pneumatic tool oil into the air fitting.
Can the stapler operate without compressed air?
No, the DST111 is a pneumatic stapler; it requires an air compressor capable of providing 4 to 8 bar.
What is the magazine capacity?
The magazine can hold up to 100 staples in a single strip.
Is the stapler suitable for hardwood?
Yes, but for very hard wood, it may be necessary to increase air pressure or pre-drill. Use appropriate staples.
Where to find spare parts for the Makita DST111?
Spare parts (seals, springs, pusher) are available from authorized Makita dealers or online. The model number is DST111.
User questions about DST111 MAKITA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Stapler in PDF format for free! Find your manual DST111 - MAKITA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DST111 by MAKITA.
USER MANUAL DST111 MAKITA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MAKITA
Model : DST111
Category : Stapler