HC24TB-3-1R1 - Beer Tap Perlick - Free user manual and instructions
Find the device manual for free HC24TB-3-1R1 Perlick in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Beer Tap Faucet |
| Brand | Perlick |
| Model | HC24TB-3-1R1 |
| Material | 316 Stainless Steel |
| Connection Thread | 3/8" MPT (Male Pipe Thread) |
| Flow Rate | Approximately 2 oz/second |
| Handle Type | Spring-loaded forward-seal |
| Seal Type | Replaceable rubber seal |
| Application | Commercial draft beer dispensing |
| Length | 5.5 inches (14 cm) |
| Weight | 1.2 lbs (0.55 kg) |
| Power Supply | None (manual operation) |
| Installation | Fits standard 3/4" shank |
| Cleaning | Hand wash with warm soapy water |
| Maintenance | Disassemble and rinse after each keg |
| Safety | Depressurize system before servicing |
| Spare Parts | Seals, springs, and handles available |
| Repairability | Repairable with standard wrenches |
| Certifications | NSF/ANSI 18 |
| Country of Origin | USA |
Frequently Asked Questions - HC24TB-3-1R1 Perlick
How do I clean my Perlick beer tap?
Disassemble the faucet by unscrewing the handle and spout. Soak parts in warm soapy water, rinse thoroughly, and air dry. Avoid abrasive cleaners to protect the stainless steel finish.
What is the forward-seal design?
It uses a spring-loaded seal that closes in the direction of flow, preventing beer from pooling inside the faucet and reducing sticky residue.
Can I install this tap on a kegerator?
Yes, it fits standard 3/4" shanks used on most home and commercial kegerators.
What tools do I need for installation?
You need an adjustable wrench, Teflon tape, and possibly a screwdriver to secure the faucet to the shank.
How often should I replace the seal?
Typically every 6–12 months depending on usage. If you notice dripping or inconsistent flow, replace the seal.
Is this faucet compatible with any beer line?
It connects to a standard 3/8" beer line using a barbed fitting or threaded adapter.
Can I use this tap for carbonated drinks or just beer?
It is designed for beer but can dispense other carbonated beverages; however, cleaning frequency may need to be adjusted.
How do I remove the handle for cleaning?
Loosen the set screw on the handle with a hex wrench, then pull straight up.
What are the dimensions of the faucet?
The overall length is about 5.5 inches and it weighs 1.2 lbs, making it compact for most towers.
Why does my beer flow too fast?
Check the pressure regulator. Typically serve at 10–12 psi for standard draft beer. Also ensure the seal is not worn.
User questions about HC24TB-3-1R1 Perlick
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Beer Tap in PDF format for free! Find your manual HC24TB-3-1R1 - Perlick and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HC24TB-3-1R1 by Perlick.
USER MANUAL HC24TB-3-1R1 Perlick
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Perlick
Model : HC24TB-3-1R1
Category : Beer Tap