69526-4TTTF - Beer Tap Perlick - Free user manual and instructions
Find the device manual for free 69526-4TTTF Perlick in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Draft Beer Faucet |
| Brand | Perlick |
| Model | 69526-4TTTF |
| Material | Chrome-plated brass body |
| Finish | Polished chrome |
| Operating Principle | Manual lever-operated flow control |
| Flow Control | Front-seal design for consistent pouring |
| Connection Type | Standard 7/8"-14 threaded shank |
| Spout Length | Approximately 2.25 inches (57 mm) |
| Overall Length | Approximately 3.5 inches (89 mm) |
| Weight | 0.6 lb (272 g) |
| Max Working Pressure | 30 PSI |
| Serving Temperature | 33-40°F (0.5-4°C) |
| Power Supply | None - manual operation |
| Food Contact Safe | Yes, FDA-compliant materials |
| Lead-Free | Yes, meets AB 1953 standards |
| Disassembly | Tool-free for easy cleaning |
| Cleaning | Hand wash with warm water and mild detergent |
| Replacement Parts | Seals, springs, and handles widely available |
| Compatibility | Standard kegerators and commercial draft systems |
| Installation | Mounts directly on standard 7/8" shank |
| Maintenance | Regular cleaning after each keg replacement |
| Warranty | 1-year limited warranty (typical) |
Frequently Asked Questions - 69526-4TTTF Perlick
How do I clean my Perlick 69526-4TTTF beer tap?
Disassemble the faucet by unscrewing the spout and removing the lever. Soak all parts in a cleaning solution designed for draft beer equipment, then rinse thoroughly with warm water. Avoid using abrasive materials that can scratch the chrome finish.
Is the Perlick 69526-4TTTF compatible with my kegerator?
Yes, it fits standard 7/8"-14 threaded shanks commonly found on home kegerators and commercial draft systems. It can be installed in minutes with basic tools.
What types of beer can I dispense with this faucet?
This faucet is designed for all types of draft beer, including lagers, ales, stouts, and craft brews. Its front-seal technology helps maintain proper carbonation and reduces foaming.
Why is my beer foamy when using this faucet?
Foam is often caused by incorrect serving pressure or temperature. Ensure your keg is set to 10-12 PSI and beer temperature is between 33-40°F. Also, verify that the faucet is fully open during pouring and clean.
Can I replace the handle on this faucet?
Yes, the handle is removable and can be swapped with standard Perlick handles. Simply unscrew the set screw on the lever and pull the handle straight up.
What materials is this faucet made of?
The body is made of chrome-plated brass with a stainless steel spring and food-grade seals. It is lead-free and safe for contact with beverages.
How often should I clean the faucet?
It is recommended to clean the faucet every time you change a keg. Additionally, a deep cleaning and sanitizing should be done every 3-6 months to prevent residue buildup.
Does this faucet require electricity or batteries?
No, the Perlick 69526-4TTTF is a manually operated faucet. It uses a lever mechanism to control beer flow without any power supply.
What is the warranty period for this faucet?
Perlick offers a 1-year limited warranty against defects in materials and workmanship. Contact Perlick customer support for warranty claims.
Can I use this faucet for dispensing other beverages like soda or wine?
While it is specifically designed for draft beer, the faucet can also be used for other carbonated beverages if cleaned thoroughly. However, it is not recommended for sticky or high-sugar drinks that may cause residue.
User questions about 69526-4TTTF Perlick
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Beer Tap in PDF format for free! Find your manual 69526-4TTTF - Perlick and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 69526-4TTTF by Perlick.