WV-CU20 - Security Camera PANASONIC - Free user manual and instructions
Find the device manual for free WV-CU20 PANASONIC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera Controller |
| Brand | Panasonic |
| Model | WV-CU20 |
| Series | WV Series |
| Compatible Cameras | Panasonic WV-CS320, WV-CS350 and other WV series with control interface |
| Control Protocol | RS-485, coaxial control |
| Dimensions (W x H x D) | 420 mm x 88 mm x 250 mm (estimate) |
| Weight | 3.0 kg (approx.) |
| Power Supply | AC 220-240 V, 50/60 Hz |
| Power Consumption | 12 W maximum |
| Pan/Tilt Control | Directional control with variable speed |
| Zoom Control | Tele, wide and variable speed zoom |
| Preset Positions | Supports up to 32 preset camera positions |
| Communication Distance | Up to 1200 m over RS-485 |
| Operating Temperature | 0 °C to 40 °C |
| Mounting Type | Desktop or rack mount with optional kit |
| Cleaning Instructions | Wipe with a soft, dry cloth; avoid liquid or aerosol cleaners |
| Safety Features | CE certified, surge protection on communication ports |
| Repair / Service | Spare parts available through authorized Panasonic service centers |
| Manual | Free PDF manual available from notice-facile.com |
Frequently Asked Questions - WV-CU20 PANASONIC
How do I connect the WV-CU20 to my Panasonic camera?
Connect the controller to the camera using a coaxial cable for video and an RS-485 twisted pair for control. Ensure the termination switches are set appropriately.
What is the default baud rate for RS-485 communication?
The default baud rate is typically 9600 bps. You can adjust it via DIP switches on the rear panel.
Can the WV-CU20 control multiple cameras?
Yes, the controller supports multi-camera operation. Use the camera selector keys to switch between connected cameras.
My camera does not respond to the controller. What should I check?
First, verify the power supply and cable connections. Then check the DIP switch settings and ensure the camera address matches the selected channel.
How do I set preset positions on the controller?
Use the P/SET button to store the current pan/tilt/zoom position. Press the PRESET number and then confirm.
What type of cable is recommended for connecting the controller?
Use a 75-ohm coaxial cable for video and a shielded twisted pair (e.g., Belden 9842) for RS-485 control.
Does the WV-CU20 support PTZ (Pan-Tilt-Zoom) functions?
Yes, it provides full PTZ control with proportional speed based on joystick deflection.
How do I clean and maintain the controller?
Power off the unit and wipe the surface with a dry soft cloth. Do not use harsh chemicals. Periodically inspect connectors for oxidation.
Where can I find the user manual for download?
You can download the free PDF manual from notice-facile.com by searching for WV-CU20 Panasonic.
Is the WV-CU20 compatible with modern IP cameras?
The WV-CU20 is designed for analog WV series cameras. It may not directly control IP cameras unless used with a compatible encoder.
User questions about WV-CU20 PANASONIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual WV-CU20 - PANASONIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WV-CU20 by PANASONIC.
USER MANUAL WV-CU20 PANASONIC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PANASONIC
Model : WV-CU20
Category : Security Camera