WV-CF504E - Security Camera PANASONIC - Free user manual and instructions
Find the device manual for free WV-CF504E PANASONIC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Analog CCTV Security Camera |
| Brand | Panasonic |
| Model | WV-CF504E |
| Image Sensor | 1/3” CCD |
| Resolution | 650 TV lines |
| Minimum Illumination | 0.02 lx (color), 0.002 lx (monochrome) |
| Lens Type | Varifocal DC drive, up to 10x zoom |
| Day/Night Function | Yes, with infrared cut filter |
| Power Supply | 24V AC / 12V DC |
| Power Consumption | 4.5 W maximum |
| Dimensions (H x W x D) | 74 mm x 73 mm x 134 mm |
| Weight | Approximately 500 g |
| Protection Rating | IP66 (suitable for outdoor use) |
| Operating Temperature | −30°C to +50°C |
| Automatic Back Focus | Yes, ABF system |
| Privacy Zones | Up to 8 configurable zones |
| Motion Detection | Built-in video motion detection |
| Cleaning Instructions | Clean lens with soft dry cloth; use neutral detergent for housing |
| Safety Notes | Disconnect power supply before maintenance; mount on stable surface |
| Spare Parts & Repairability | Replacement parts available from Panasonic authorized centers |
Frequently Asked Questions - WV-CF504E PANASONIC
How do I adjust the lens focus and zoom?
Use the varifocal lens adjustment ring. Loosen the zoom ring and focus ring, then adjust while watching the monitor. Tighten after setting. For fine tuning, run the Auto Back Focus if available.
What power supply is required for the WV-CF504E?
The camera accepts 24V AC or 12V DC. Connect to a compatible CCTV power adapter. Ensure voltage and polarity are correct to avoid damage.
Is this camera weatherproof?
Yes, the housing meets IP66 rating, suitable for outdoor installation. Protect connectors and avoid exposing cables to moisture.
How do I clean the camera lens?
Use a soft, dry cloth to remove dust. For stubborn stains, use lens cleaning paper with a small amount of cleaner. Never use abrasive or volatile chemicals.
How to perform a factory reset?
To reset all settings to defaults, press the RESET switch inside the camera housing. Refer to the indicator LED for confirmation; settings are cleared.
Can I connect this camera directly to a DVR?
Yes, it outputs standard analog composite video (BNC) and supports coaxial connection to any DVR with analog inputs. Power separately.
What is the minimum illumination level?
In monochrome mode the camera needs only 0.002 lx, while in color mode it requires 0.02 lx. It can switch to night mode automatically.
How to set privacy masks?
Use the OSD menu to access Privacy Zone settings. Select the zone number and position/resizing. Up to 8 zones can be configured.
What is the recommended mounting height?
For best coverage, install the camera 2.5 to 3 meters above ground. Aim it downward at a sufficient angle to capture faces and activities.
What if there is no video signal?
Check power supply and BNC connection. Verify the lens cap is removed and the camera is not in night mode. Test the cable with a known working device.
User questions about WV-CF504E PANASONIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual WV-CF504E - PANASONIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WV-CF504E by PANASONIC.
USER MANUAL WV-CF504E PANASONIC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PANASONIC
Model : WV-CF504E
Category : Security Camera