WJ-MS488 - Security Camera PANASONIC - Free user manual and instructions
Find the device manual for free WJ-MS488 PANASONIC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera Matrix Switcher |
| Camera Inputs | 48 (max) |
| Monitor Outputs | 8 |
| Video Standard | Composite NTSC/PAL |
| Control Interface | RS-232C, RS-485 |
| Switching Capability | Full-matrix video switching |
| Power Supply | 100-240V AC, 50/60Hz |
| Power Consumption | Approx. 80 W |
| Dimensions (W x H x D) | 430 x 132 x 350 mm (19-inch rack, 3U) |
| Weight | Approx. 9 kg |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Operating Humidity | 30% to 90% (non-condensing) |
| Alarm Inputs | Yes, supported |
| PTZ Control | Supports Pan/Tilt/Zoom control |
| Main Functions | Sequential switching, alarm integration, camera layout |
| Security | Password-protected settings |
| Maintenance | Wipe with a dry, soft cloth |
| Repairability | Modular design with replaceable boards |
| Included Accessories | Power cord, rack mounting brackets, manual |
| Country of Origin | Japan |
Frequently Asked Questions - WJ-MS488 PANASONIC
How many cameras can be connected to the WJ-MS488?
The WJ-MS488 supports up to 48 camera inputs, so you can connect a total of 48 analog cameras.
Can I control PTZ cameras with this unit?
Yes, the matrix switcher includes PTZ control via RS-232/485, allowing you to pan, tilt, and zoom compatible cameras.
What are the main outputs available?
The unit provides 8 monitor outputs, allowing you to connect multiple monitors or recorders.
How do I set up the alarm inputs?
Alarm inputs can be configured through the front panel or serial interface. Each alarm can be linked to a specific camera and monitor.
Does the unit support password protection?
Yes, you can set a password for configure mode to prevent unauthorized changes.
What type of cameras are compatible?
The WJ-MS488 works with standard analog composite video cameras (NTSC/PAL) and supports a range of Panasonic and third-party cameras.
How to clean and maintain the device?
Disconnect the power first. Use a soft dry cloth to wipe the exterior. Do not use liquid or aerosol cleaners.
Can the device be rack-mounted?
Yes, it is designed for 19-inch rack mounting and includes mounting brackets.
What is the power consumption?
The unit consumes approximately 80 watts depending on the number of input boards installed.
How can I update the firmware?
This model has no user-upgradeable firmware; all functions are hardware-controlled via internal switches.
User questions about WJ-MS488 PANASONIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual WJ-MS488 - PANASONIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WJ-MS488 by PANASONIC.
USER MANUAL WJ-MS488 PANASONIC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PANASONIC
Model : WJ-MS488
Category : Security Camera