A-STSCB - Office Atdec - Free user manual and instructions
Find the device manual for free A-STSCB Atdec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Atdec |
| Model | A-STSCB |
| Product Type | Single monitor arm for office desks |
| Mounting Method | Desk clamp (C-clamp) with anti-slip pad |
| Supported Screen Sizes | 17" to 32" diagonal |
| VESA Compatibility | 75 x 75 mm and 100 x 100 mm |
| Maximum Load Capacity | 19.8 lb (9 kg) |
| Clamp Thickness Range | 0.4" to 2.4" (10 to 60 mm) |
| Height Adjustment Range | 12.6" (320 mm) |
| Tilt Range | -15° to +15° |
| Swivel Range | 180° |
| Monitor Rotation | 360° for landscape and portrait use |
| Arm Reach | 18.1" (460 mm) |
| Product Dimensions | 4.7" x 18.5" x 12.2" (120 x 470 x 310 mm) |
| Net Weight | 7.1 lb (3.2 kg) |
| Materials | Aluminum alloy and cold-rolled steel |
| Finish | Matte black powder coating |
| Power Supply | No electrical supply required - manual gas-spring assist |
| Cable Management | Built-in cable routing channels |
| Cleaning and Maintenance | Wipe with a soft, dry cloth; do not use abrasive or solvent-based cleaners |
| Safety Features | Secure clamping pad, gas-spring tension lock, anti-slip VESA brackets |
| Spare Parts and Repair | Replacement clamps, VESA plates and gas-spring cartridges are available from authorized Atdec service partners |
| Warranty | 5 years limited warranty |
Frequently Asked Questions - A-STSCB Atdec
How do I install the A-STSCB monitor arm on my desk?
Attach the clamp base to the desk edge and tighten the knob until secure. Then slide the monitor VESA plate into the arm, align it with the back of the monitor, and tighten the four VESA screws. The clamp fits desk thicknesses from 10–60 mm. Use the included hex key for final adjustments.
What monitor sizes and VESA patterns are compatible?
The A-STSCB supports 17" to 32" monitors with 75 x 75 mm or 100 x 100 mm VESA mounting holes. Check the back of your monitor for these dimensions before installing.
What is the maximum load capacity of the arm?
The rated capacity is 19.8 lb (9 kg), including the monitor and any attached accessories. Do not exceed this limit to ensure safe and stable operation.
Can I adjust the screen height, tilt, and swivel?
Yes. The arm allows 12.6" (320 mm) of height adjustment, -15° to +15° tilt, 180° swivel, and 360° rotation for landscape/portrait orientation. Loosen the relevant tension knob slightly to adjust, then retighten.
Does the monitor arm require an electrical power source?
No, the A-STSCB is a passive/manual gas-spring arm. It does not need a power supply; adjustment is done by hand.
How do I keep the monitor arm clean?
Use a soft dry cloth to wipe the surfaces. For stubborn dirt, slightly dampen the cloth with water. Never use abrasive pads, alcohol, or strong solvents, as they may damage the coating.
What safety precautions should I follow when using the arm?
Always tighten all clamp and VESA screws securely, route cables along the cable channels to avoid tripping, and never exceed the rated monitor weight. Check the clamp tension periodically if the arm is moved frequently.
How can I fix a monitor that slowly drops after adjustment?
The gas spring tension may need adjustment. Locate the tension-adjustment screw on the arm near the clamp (or under the cover). Tighten the screw clockwise until the monitor holds its position. If it still drifts, contact Atdec support.
Does the arm come with cable management?
Yes, the built-in cable routing channels guide the monitor cable neatly along the arm and down the clamp, reducing clutter and preventing strain on the connector.
Where can I find spare parts or repair service?
Spare parts including replacement clamps, VESA plates, and gas-spring cartridges are available from authorized Atdec dealers. For repair, contact Atdec customer support with your model number A-STSCB and proof of purchase. A 5-year limited warranty covers manufacturing defects.
User questions about A-STSCB Atdec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Office in PDF format for free! Find your manual A-STSCB - Atdec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. A-STSCB by Atdec.
USER MANUAL A-STSCB Atdec
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Atdec
Model : A-STSCB
Category : Office