TH-1032-VFM - Wall mount Atdec - Free user manual and instructions
Find the device manual for free TH-1032-VFM Atdec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Atdec |
| Model | TH-1032-VFM |
| Product type | Wall mount |
| Compatible screen size | 10" - 32" flat panels |
| VESA compatibility | 75x75, 100x100, 200x100, 200x200 mm |
| Maximum weight capacity | 25 kg (55 lb) |
| Material | Steel / Aluminum |
| Surface finish | Black powder coat |
| Mounting type | Wall mounted with tilt adjustment |
| Tilt range | -5° to +15° |
| Distance from wall | 23 mm close-to-wall profile |
| Installation | Single stud mount or concrete wall mounting |
| Included hardware | Fixing screws, wall plugs, spacers, VESA screws |
| Repair and spare parts | Spare screws and brackets available from the manufacturer |
| Maintenance | Wipe with a dry cloth; check tightness of bolts regularly |
| Safety standards | Designed for indoor use; ensure wall can support the load |
| Warranty | 2-year limited warranty |
Frequently Asked Questions - TH-1032-VFM Atdec
What VESA patterns does the Atdec TH-1032-VFM wall mount support?
The Atdec TH-1032-VFM supports VESA patterns of 75x75 mm, 100x100 mm, 200x100 mm and 200x200 mm. Ensure your screen has one of these hole patterns to fit.
What is the maximum weight capacity of the TH-1032-VFM?
The maximum weight capacity is 25 kg (55 lb). Always verify that your TV or monitor weighs less than this limit before installing.
What tools do I need for installation?
You will need a Phillips screwdriver, a level, a drill with appropriate masonry or wood bits, and a socket wrench or hex key for tightening the tilt bolts. A stud finder is recommended when mounting on drywall.
Can the TH-1032-VFM be installed on drywall?
Yes, it can be installed on drywall, but you must fix it to wooden studs or use suitable wall anchors rated for the load. Locate studs with a stud finder and follow the included mounting instructions.
Is the wall mount tiltable?
Yes, the TH-1032-VFM offers a tilt range of -5° to +15°, allowing you to reduce glare and optimize viewing angle.
Does the bracket include all the required fixing screws?
Yes, the package includes screws for the wall plate, wall plugs, spacers of different lengths, and VESA screws for mounting the screen. Always use the correct screws for your TV model and wall type.
Can I use this mount with a curved TV?
The TH-1032-VFM is designed for flat-back screens. A curved TV may still be compatible if its VESA pattern matches, but the curved shape could cause the screen to protrude or not sit correctly. Use spacers if needed and test carefully.
How do I adjust the tilt after installation?
Loosen the tilt adjustment bolts on both sides of the bracket, set the desired angle, then retighten the bolts securely. Do not overtighten as this may strip the threads or damage the mount.
Is the mount suitable for outdoor use?
No, the TH-1032-VFM is designed for indoor use only. Exposure to moisture or extreme temperatures could cause corrosion or failure.
How far from the wall does the TV sit?
When installed close to the wall, the distance from the back of the screen to the wall is approximately 23 mm. This gives a sleek, low-profile appearance.
User questions about TH-1032-VFM Atdec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Wall mount in PDF format for free! Find your manual TH-1032-VFM - Atdec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TH-1032-VFM by Atdec.
USER MANUAL TH-1032-VFM Atdec
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Atdec
Model : TH-1032-VFM
Category : Wall mount