SmartHome CO Detector FS1CO - Security Camera Ferguson - Free user manual and instructions
Find the device manual for free SmartHome CO Detector FS1CO Ferguson in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Carbon monoxide detector with smart home connectivity |
| Brand | Ferguson |
| Model | SmartHome CO Detector FS1CO |
| Category | Security Camera |
| Dimensions | 4.8 × 3.2 × 1.5 inches (12.2 × 8.1 × 3.8 cm) |
| Weight | 4.2 oz (120 g) |
| Power Supply | 2 × AA batteries (included), DC 3V |
| Sensor Type | Electrochemical CO sensor |
| Detection Range | 0–999 ppm CO concentration |
| Alarm Loudness | 85 dB at 10 feet (3 meters) |
| Display | Digital LCD showing current CO level and battery status |
| Smart Features | Wi-Fi enabled, push notifications via Ferguson SmartHome app |
| Test/Reset Button | Yes, for self-test and silencing false alarms |
| Installation | Wall-mounted or freestanding on a flat surface |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Operating Humidity | 5% to 95% relative humidity (non-condensing) |
| Certifications | UL 2034, EN 50291 compliant |
| Maintenance | Vacuum sensor openings monthly; replace unit every 7 years |
| Safety Features | Tamper-resistant design, low-battery warning, end-of-life alert |
| Spare Parts & Repairability | No user-serviceable parts; replace entire unit at end of life |
Frequently Asked Questions - SmartHome CO Detector FS1CO Ferguson
How do I install the Ferguson SmartHome CO Detector FS1CO?
Choose a location at least 5 feet (1.5 m) from fuel-burning appliances and 10 feet (3 m) from humidity sources like bathrooms. Mount it on the wall at eye level or on the ceiling. Secure the backplate with screws, insert the batteries, and slide the unit onto the plate. The device will start a self-test and show the current CO level on the display.
How do I pair the detector with my smartphone?
Download the Ferguson SmartHome app from your app store. Turn on Bluetooth and Wi-Fi on your phone. In the app, select 'Add Device' and scan the QR code on the detector. Follow the in-app instructions to connect to your home Wi-Fi network. Once paired, you'll receive real-time alerts and can view CO levels remotely.
What should I do when the alarm sounds?
Treat every alarm as a real emergency. Do not ignore it. Immediately move to fresh air outdoors or by an open door/window. Ensure all persons and pets are accounted for. Call your emergency services from a safe location. Do not re-enter the home until the source of CO has been identified and cleared.
How often should I test the detector?
Test the CO detector at least once a month by pressing and holding the Test/Reset button until you hear a loud beep. This verifies the sensor, alarm, and battery are working correctly. You can also set a reminder via the smartphone app for automatic monthly testing notifications.
How do I replace the batteries?
When the low-battery warning chirps, remove the unit from the wall or stand. Open the battery compartment, remove the old batteries, and insert two new AA alkaline batteries, matching the polarity signs. Close the compartment, reattach the unit, and press Test to confirm the installation.
What does the end-of-life warning mean?
The detector is designed to operate for 7 years from the date of manufacture. After this period, the sensor may no longer be accurate. The unit will beep and display 'END' to indicate it must be replaced. Do not continue using an expired detector; dispose of it properly and install a new one.
Can the detector be interconnected with other smart home devices?
Yes, the FS1CO supports integration with the Ferguson SmartHome ecosystem. You can link it to smart lights, locks, or cameras through the app. For example, you can set up automation to turn on lights when CO is detected. It may also work with IFTTT or Google Home, depending on firmware updates.
Where should I place the detector in my home?
Install at least one detector in each bedroom, in the hallway outside sleeping areas, and on every floor of your home. For optimal detection, place it 5 feet above the floor on a wall or on the ceiling, at least 12 inches from corners. Avoid placing near vents, open windows, or combustion appliances to reduce false alarms.
How do I clean and maintain the detector?
Use a soft brush or vacuum cleaner with a crevice tool to gently remove dust from the air vents once a month. Do not use water, chemicals, or sprays, as they can damage the sensor. Wipe the exterior with a dry cloth. Also, ensure that paint, stickers, or other objects do not cover the openings.
Is the Ferguson SmartHome CO Detector FS1CO certified?
Yes, the detector is certified to meet UL 2034 (North American standard) and EN 50291 (European standard) for safety and reliability. These certifications ensure accurate CO detection and alarm performance. Always verify the certification mark on the product before use.
User questions about SmartHome CO Detector FS1CO Ferguson
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual SmartHome CO Detector FS1CO - Ferguson and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SmartHome CO Detector FS1CO by Ferguson.
USER MANUAL SmartHome CO Detector FS1CO Ferguson
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Ferguson
Model : SmartHome CO Detector FS1CO
Category : Security Camera