SmartHome Repeater and Gas Leak Sensor FS1RG - Security Camera Ferguson - Free user manual and instructions
Find the device manual for free SmartHome Repeater and Gas Leak Sensor FS1RG Ferguson in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Smart Home Repeater and Gas Leak Sensor with Security Camera |
| Brand | Ferguson |
| Model | SmartHome Repeater and Gas Leak Sensor FS1RG |
| Category | Security Camera |
| Detected Gases | Methane (CH4) and Propane (C3H8) |
| Sensor Type | Semiconductor gas sensor with high sensitivity |
| Alarm Output | Built-in siren ≥85 dB and LED flashing alerts |
| Wireless Repeater Function | Extends Zigbee/Z-Wave network range up to 30 m indoors |
| Camera Resolution | 1080p Full HD (1920 × 1080 pixels) |
| Night Vision | IR LEDs with up to 10 m visibility in darkness |
| Field of View | 120° diagonal wide-angle lens |
| Connectivity | Wi-Fi 2.4 GHz, Zigbee 2.4 GHz, Z-Wave 908.42 MHz |
| Power Supply | AC 100–240 V, DC 5 V/1 A adapter, battery backup (CR123A) |
| Dimensions (W × H × D) | 65 mm × 65 mm × 32 mm |
| Weight | 92 g (including battery) |
| Operating Temperature | -10 °C to 50 °C (14 °F to 122 °F) |
| Operating Humidity | ≤90% RH non-condensing |
| Mounting Type | Desktop stand or wall-mount via included bracket |
| Mobile App Compatibility | Ferguson SmartHome app for iOS and Android |
| Smart Notifications | Instant push alerts for gas leaks, motion and tampering |
| Maintenance | Wipe exterior with soft dry cloth; test sensor once a month |
| Spare Parts & Repairability | Power adapter, mounting kit and battery available; repair by qualified technician |
| Safety Compliance | CE, RoHS and EN 50194-1 certified |
Frequently Asked Questions - SmartHome Repeater and Gas Leak Sensor FS1RG Ferguson
What does the FS1RG detect?
The FS1RG detects methane (natural gas) and propane (LPG) leaks. It triggers an audible alarm and sends a push notification to your smartphone.
How do I install the gas leak sensor?
Plug the sensor into a power outlet near your gas appliance or mount it on the wall with the included bracket. Ensure it is not blocked by curtains or furniture. After powering up, pair it with the Ferguson SmartHome app following the in-app instructions.
How does the repeater function work?
The device acts as a Zigbee/Z-Wave repeater to extend the range of your smart home network. It forwards signals from other devices to the main hub, improving network stability and coverage up to 30 meters indoors.
What should I do if the gas alarm goes off?
Immediately turn off the gas supply, extinguish all flames, do not operate electrical switches, open windows and doors to ventilate, leave the area, and call your gas provider or emergency services. Do not re-enter until it is safe.
How do I test the gas sensor?
Press the test button on the device for 3 seconds. The alarm should sound and the LED flash. You can also trigger a test from the Ferguson SmartHome app. Perform this test at least once a month.
Does the FS1RG work without internet?
The gas alarm and local siren will still work without internet, but push notifications, video streaming and remote control require an active Wi-Fi connection and the Ferguson SmartHome app.
How do I view the security camera live feed?
Open the Ferguson SmartHome app, select the FS1RG device, and tap Live View. You can watch the 1080p stream, use two-way audio and take snapshots.
Can I use the FS1RG outdoors?
No, the FS1RG is designed for indoor use only. It has an IP20 rating and operating temperature between -10°C and 50°C, so place it in a dry, sheltered room such as a kitchen, garage or utility room.
How do I reset the FS1RG to factory settings?
Press and hold the reset button on the bottom of the device for 10 seconds until the LED blinks rapidly. The device will restart and be ready to pair again via the app.
What maintenance does the FS1RG require?
Clean the exterior and sensor vents with a soft, dry cloth to prevent dust buildup. Do not use solvents or water. Check the battery backup annually and replace it with a CR123A lithium battery when needed.
User questions about SmartHome Repeater and Gas Leak Sensor FS1RG Ferguson
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual SmartHome Repeater and Gas Leak Sensor FS1RG - Ferguson and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SmartHome Repeater and Gas Leak Sensor FS1RG by Ferguson.
USER MANUAL SmartHome Repeater and Gas Leak Sensor FS1RG Ferguson
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Ferguson
Model : SmartHome Repeater and Gas Leak Sensor FS1RG
Category : Security Camera