CP-S860E - Video projector HITACHI - Free user manual and instructions
Find the device manual for free CP-S860E HITACHI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Device type | Video projector |
| Brand | Hitachi |
| Model | CP-S860E |
| Display technology | 3LCD panel |
| Native resolution | SVGA (800 x 600) |
| Brightness | 2000 ANSI lumens |
| Contrast ratio | 400:1 |
| Aspect ratio | 4:3 |
| Lamp type | 130 W UHB lamp |
| Lamp life | 2000 hours |
| Projection screen size | 30 to 300 inches |
| Projection distance | 1.2 m to 12.4 m |
| Keystone correction | ±30° vertical |
| Connectivity | VGA, S-Video, Composite, Audio |
| Built-in speaker | 1 W mono |
| Power consumption | 250 W |
| Power supply | AC 100-240V, 50/60Hz |
| Dimensions (W x D x H) | 285 x 202 x 74 mm |
| Weight | 3.2 kg |
| Noise level | 32 dB |
| Security | Kensington slot |
| Maintenance | Replaceable lamp, cleanable air filter |
| Air filter cleaning interval | Every 500 hours |
| Repairability | User-replaceable lamp and air filter |
Frequently Asked Questions - CP-S860E HITACHI
How do I replace the lamp on my Hitachi CP-S860E?
Turn off the projector, disconnect the power, and wait for the lamp to cool. Slide the lamp cover open, remove the screws, and replace the old lamp with a genuine Hitachi replacement lamp. Reset the lamp timer afterwards.
What is the maximum resolution supported by the CP-S860E?
The CP-S860E has a native SVGA resolution (800 x 600). It can accept higher resolution signals such as XGA and compress them to fit the panel.
How do I clean the air filter?
Turn off the projector and unplug it. Locate the air filter on the side or bottom. Gently remove the filter and clean it with a vacuum cleaner or wash it with water if it is washable. Let it dry completely before reinstalling. Clean the filter every 500 hours.
Can I connect my laptop to the projector?
Yes, use a VGA cable to connect your laptop's external monitor port to the projector's VGA input. Switch the projector to the corresponding input using the Source button.
How do I set up the projector for a presentation?
Place the projector on a stable surface, connect your device, and power it on. Adjust the zoom and focus rings to sharpen the image. Use the keystone correction to align the image if the projector is tilted.
Why does the projector show a blank screen?
Check that the projector is powered on and the lamp indicator is green. Ensure your source device is connected and sending a signal. Press the Source button to cycle through inputs. If the lamp has exceeded its life, replace it.
Is this projector suitable for a home theater?
The CP-S860E is designed for portable presentations and has SVGA resolution. It can play video from a composite or S-Video source, but for HD home theater use, a model with higher resolution and HDMI is recommended.
What is the lamp life and where can I buy a spare?
The typical lamp life is 2,000 hours. Spare lamps are available from Hitachi dealers or online part stores. Use a genuine Hitachi lamp to ensure correct brightness and safety.
How do I correct a trapezoid image?
Use the keystone correction buttons on the projector or remote control. These buttons adjust vertical keystone, reducing the trapezoid effect when the projector is placed at an angle to the screen.
How do I reset the lamp timer?
After replacing the lamp, press the RESET button on the control panel or remote for 3 seconds. The lamp hour counter will reset, preventing the maintenance warning from appearing.
User questions about CP-S860E HITACHI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video projector in PDF format for free! Find your manual CP-S860E - HITACHI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CP-S860E by HITACHI.