LP-EX5002 - Video projector HITACHI - Free user manual and instructions
Find the device manual for free LP-EX5002 HITACHI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Video Projector |
| Brand | Hitachi |
| Model | LP-EX5002 |
| Display Technology | 3LCD (Liquid Crystal Display) |
| Resolution | XGA (1024 x 768 pixels) |
| Brightness | 5000 ANSI Lumens |
| Contrast Ratio | 2000:1 |
| Lamp Type | 275W UHP |
| Lamp Life | 3000 hours (Normal Mode), 4000 hours (Eco Mode) |
| Zoom | 1.5x Manual Zoom |
| Keystone Correction | Vertical ±30° |
| Inputs | HDMI, VGA x2, S-Video, Composite, Audio |
| Outputs | VGA Monitor Out, Audio Out |
| Built-in Speaker | 10W x 1 |
| Noise Level | 32 dB (Standard), 28 dB (Eco) |
| Power Consumption | 375W |
| Dimensions (W x H x D) | 476 x 272 x 370 mm |
| Weight | 7.5 kg |
| Remote Control | Included with batteries |
| Security | Kensington Lock Slot, Password Protection |
| Cleaning | Removable and washable air filter |
| Repairability | User-replaceable lamp unit and air filter |
| General Information | Designed for large meeting rooms and classrooms |
Frequently Asked Questions - LP-EX5002 HITACHI
How do I replace the lamp on the Hitachi LP-EX5002?
To replace the lamp, first turn off the projector and unplug it. Wait at least 30 minutes for the lamp to cool down. Then, use a screwdriver to remove the lamp cover on the bottom or side, remove the old lamp module, and insert the new one. Make sure it is securely seated and reattach the cover. Reset the lamp timer from the menu after replacement.
How should I clean the air filter?
Remove the air filter cover on the side of the projector. Take out the filter and gently wash it with a vacuum cleaner or rinse with water and let it dry completely. Do not use soap or solvents. Reinstall the dry filter and replace the cover. Clean it every 500 hours of use or when the warning appears.
How can I connect my laptop to the projector?
Use a VGA cable or HDMI cable to connect your laptop to the corresponding input port on the projector. Then, switch the projector's input source by pressing the 'Source' or 'Input' button on the remote control or panel. On your laptop, press the appropriate key combination (e.g., Fn+F8) to extend or duplicate the display.
What should I do if the projector does not turn on?
First, check that the power cord is firmly connected to both the projector and the wall outlet. Verify the wall outlet is working by plugging in another device. If the projector still doesn't power on, check if the lamp cover is properly closed and the lamp is installed correctly. If the power button blinks, it may indicate a temperature or lamp fault. Let the projector cool down and try again.
How do I adjust keystone distortion?
Press the 'Keystone' button on the remote control or navigate to the 'Display' menu. Use the arrow keys to correct the vertical trapezoid shape until the image is perfectly rectangular. The LP-EX5002 offers vertical correction up to ±30 degrees, but for best quality, position the projector perpendicular to the screen.
How do I reset the lamp timer?
Go to the 'Setup' or 'Maintenance' menu on the projector. Select 'Lamp Timer Reset' and choose 'Yes' to confirm. This should be done after replacing the lamp to ensure accurate lamp life tracking. If the option is grayed out, make sure you have replaced the lamp recently.
What is the optimal projection distance for a 100-inch screen?
With the 1.5x zoom lens, you can place the projector at a distance between 2.4 and 3.6 meters from the screen to achieve a 100-inch diagonal image. Use the zoom ring to fine-tune the size. For other screen sizes, refer to the distance range in the user manual.
How can I reset the projector to factory settings?
Access the 'Setup' menu, scroll to 'Reset' and choose 'Factory Reset' or 'All Reset'. Confirm with 'Yes'. This will restore all settings to their defaults, including brightness, contrast, and input preferences. It does not affect the lamp timer or security settings.
Why is the image blurry or out of focus?
First, adjust the focus ring on the lens until the image is sharp. If it remains blurry, check that the projector is at the correct distance from the screen and the resolution is set to the projector's native XGA (1024x768). Also, ensure the lens is clean and not fogged from temperature changes.
What security features does the Hitachi LP-EX5002 have?
The projector includes a Kensington lock slot for physical theft prevention. It also supports password protection, which can be enabled from the 'Security' menu. In addition, you can set a timed password that locks the projector after a specific period of inactivity, preventing unauthorized use.
User questions about LP-EX5002 HITACHI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video projector in PDF format for free! Find your manual LP-EX5002 - HITACHI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LP-EX5002 by HITACHI.
USER MANUAL LP-EX5002 HITACHI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HITACHI
Model : LP-EX5002
Category : Video projector