Hydro Beam X2 - Lighting American DJ - Free user manual and instructions
Find the device manual for free Hydro Beam X2 American DJ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Moving Head Beam Light |
| Brand | American DJ |
| Model | Hydro Beam X2 |
| Light Source | 100W LED |
| Beam Angle | 2 degrees |
| Power Consumption | 140W |
| DMX Channels | 12 or 15 selectable |
| Pan Range | 540 degrees |
| Tilt Range | 270 degrees |
| Color Wheel | 7 colors plus open |
| Gobo Wheel | 7 gobos plus open |
| Prism | 8-facet rotating prism |
| Frost Filter | Built-in |
| Dimmer | Electronic 0 to 100 percent |
| Strobe | Adjustable rate up to 20 Hz |
| Focus | Motorized |
| IP Rating | IP65 (weatherproof) |
| Housing | Rugged die-cast aluminum |
| Operating Voltage | 100 to 240 V AC, 50/60 Hz |
| Dimensions (L x W x H) | 305 x 230 x 410 mm |
| Weight | 8.5 kg |
| Maintenance | Clean lens and housing with a soft cloth and mild cleaner |
| Safety | Use safety cable and mount securely; keep away from flammable surfaces |
| Parts & Repairability | Replaceable LED module, power supply, and main board |
| Included Accessories | Power cord, DMX cable, and mounting bracket |
Frequently Asked Questions - Hydro Beam X2 American DJ
How do I set the DMX address on the Hydro Beam X2?
Use the control panel on the rear of the fixture to navigate to the DMX address setting. Enter the desired address using the up and down buttons and confirm with the enter key.
What is the IP rating of the Hydro Beam X2?
The Hydro Beam X2 has an IP65 rating, meaning it is dust-tight and protected against water jets. It is suitable for outdoor use.
How do I clean the lens of the Hydro Beam X2?
Use a soft, lint-free cloth slightly dampened with glass cleaner or isopropyl alcohol. Gently wipe the lens to remove dust and residue. Avoid abrasive materials.
Can I use the Hydro Beam X2 without DMX control?
Yes, the fixture has a standalone mode with built-in programs. You can select this mode using the control panel and choose from various auto-run or sound-active options.
What is the beam angle of the Hydro Beam X2?
The Hydro Beam X2 features a very narrow 2 degree beam angle, producing a tight, intense beam ideal for aerial effects.
How many DMX channels does the Hydro Beam X2 support?
The fixture can operate in either 12 or 15 DMX channels, selectable via the control panel. Refer to the manual for channel assignments.
Is the Hydro Beam X2 suitable for outdoor permanent installation?
With its IP65 weatherproof housing, it is designed for outdoor use. For permanent installation, ensure proper mounting with a certified bracket and safety cable.
What should I do if the fixture stops responding to DMX?
Check the DMX cable connections and terminator. Verify that the DMX address is set correctly and that no other fixture is causing interference. Also, ensure the controller is sending DMX signals.
How do I replace the LED module in the Hydro Beam X2?
The LED module is user-replaceable. Disconnect power, remove the rear cover, disconnect the old module, and install the new one. For safety, have a qualified technician perform the replacement.
What is the maximum operating temperature for the Hydro Beam X2?
The recommended ambient temperature range is 0 to 45 degrees Celsius (32 to 113 degrees Fahrenheit). Avoid exceeding this range to prevent overheating.
User questions about Hydro Beam X2 American DJ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual Hydro Beam X2 - American DJ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Hydro Beam X2 by American DJ.
USER MANUAL Hydro Beam X2 American DJ
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : American DJ
Model : Hydro Beam X2
Category : Lighting