Jolt Bar FX2 - Lighting American DJ - Free user manual and instructions
Find the device manual for free Jolt Bar FX2 American DJ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of Product | LED Effect Bar |
| Brand | American DJ |
| Model | Jolt Bar FX2 |
| Category | Lighting & Effects |
| Light Source | 2 x 30W RGBW LEDs |
| LED Quantity | 2 LED modules plus auxiliary controls |
| Beam Angle | 15 degrees (approximate) |
| DMX Channels | 6 or 12 selectable |
| Control Modes | DMX512, Sound Active, Master/Slave, Standalone |
| Power Supply | 100-240V AC, 50/60Hz |
| Power Consumption | 90W max |
| Dimensions (W x H x D) | 39.8 x 6.7 x 12.2 in (1010 x 170 x 310 mm) |
| Weight | 28.7 lbs (13 kg) |
| Housing | Durable ABS plastic and steel |
| Cooling | Passive convection cooling |
| Safety Features | Safety loop and locking bracket |
| Mounting Options | Floor standing or truss mount with clamps |
| Built-in Programs | Multiple auto programs with adjustable speed |
| Maintenance | Regular cleaning with a soft, lint-free cloth |
| Repairability | Common parts available; service by qualified personnel |
Frequently Asked Questions - Jolt Bar FX2 American DJ
How do I set up the Jolt Bar FX2 for the first time?
To set up the Jolt Bar FX2, first ensure the power switch is off before connecting to a suitable 100-240V AC outlet. Install the fixture on a stable surface or mount it securely on a truss using a rated clamp. Connect your DMX controller via the 3-pin XLR input/output, set the desired DMX address, and then power on the unit.
What are the different DMX channel modes and how to select them?
The Jolt Bar FX2 offers 6-channel and 12-channel DMX modes. To select a mode, use the mode button on the control panel to navigate to the DMX settings option. Choose between 6CH or 12CH depending on your needs. The 6CH mode is for basic control, while the 12CH mode gives you more detailed parameters including strobe effects and individual LED control.
How do I operate the fixture in sound active mode?
To activate sound active mode, press the mode button until you land on the sound-active setting (often indicated by ‘Snd’ or a music note icon). The built-in microphone will then sync the light patterns to ambient music. You can adjust the sensitivity via a rotatory dial or up/down buttons on the control panel.
Can I run multiple Jolt Bar FX2 fixtures in master/slave mode?
Yes, you can link up to 16 units in master/slave operation. Set the first unit as the master by choosing the master/slave mode on the control panel. Connect additional units via DMX cables from the master’s output to the slave’s input. Each slave should be set to the same operational mode as the master to ensure synchronized effects.
How do I clean the lenses and housing?
Before cleaning, always disconnect the fixture from power. Use a soft, dry, lint-free cloth to gently wipe the housing and lenses. For stubborn dirt, slightly dampen the cloth with a mild glass cleaner or isopropyl alcohol. Avoid using abrasive materials or solvents, as they may damage the lens coating. Regular cleaning prevents overheating and maintains light output.
What power requirements are needed?
The Jolt Bar FX2 operates on a universal 100-240V AC, 50/60Hz power supply. It draws approximately 90W at maximum intensity. It is recommended to connect the fixture to a grounded outlet and not to exceed a total load of 80% of the circuit rating when daisy-chaining units.
How to mount the fixture safely on a truss?
When mounting on a truss, use rated clamps with a safe working load greater than the fixture’s weight (13 kg). Attach a safety cable as an extra precaution by looping it through the safety loop on the fixture and around the truss. Ensure all bolts are tightened securely and position the unit away from flammable materials.
The fixture does not respond to DMX. What should I check?
First, verify that the DMX address matches your controller’s settings. Then check all DMX cables for damage and ensure they are correctly connected to the input/output ports. Test with a different cable or a direct connection to confirm the issue. Also, make sure the controller is set to the correct mode and that other lighting fixtures are not causing a data clash. Finally, inspect the DMX terminator at the end of the chain if needed.
Can I replace the LEDs myself?
Replacing the LED modules on the Jolt Bar FX2 is not recommended for untrained users. The fixture contains high-voltage components and requires disassembly of the housing. We advise having a qualified service technician perform LED replacements to maintain warranty coverage and ensure safety.
What is the IP rating for outdoor use?
The Jolt Bar FX2 is a lighting effect designed primarily for indoor use. It does not carry a high IP rating and is not suitable for outdoor installation without proper protection. To use it outdoors, you must place it in a weatherproof enclosure or under a covered area to prevent water damage and electrical failure.
User questions about Jolt Bar FX2 American DJ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual Jolt Bar FX2 - American DJ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Jolt Bar FX2 by American DJ.
USER MANUAL Jolt Bar FX2 American DJ
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : American DJ
Model : Jolt Bar FX2
Category : Lighting