ATQP30 - Angle Grinder Mac Tools - Free user manual and instructions
Find the device manual for free ATQP30 Mac Tools in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Angle Grinder |
| Brand | Mac Tools |
| Model | ATQP30 |
| Power Source | Pneumatic (air-powered) |
| Free Speed | 25,000 RPM |
| Wheel Diameter | 3 inches (76.2 mm) |
| Spindle Thread | 3/8-24 |
| Air Inlet Size | 1/4 NPT |
| Recommended Air Pressure | 90 PSI (6.2 bar) |
| Average Air Consumption | 4 CFM |
| Noise Level | Approx. 80 dB |
| Weight | 1.5 lbs (0.68 kg) |
| Overall Length | 7 inches (178 mm) |
| Housing Material | Aluminum alloy |
| Handle Design | Padded ergonomic grip |
| Safety Features | Guard and throttle safety lock |
| Maintenance | Daily lubrication with air tool oil |
| Included Accessories | Spanner wrench, air inlet plug |
| Repair & Support | Mac Tools service centers |
| Compliance | ANSI/OSHA safety standards |
Frequently Asked Questions - ATQP30 Mac Tools
What type of angle grinder is the Mac Tools ATQP30?
The ATQP30 is a pneumatic air angle grinder designed for grinding and surface preparation in professional workshops.
What air pressure should I use for the ATQP30?
Operate the tool at 90 PSI (6.2 bar) with a well-maintained compressor and an air hose of adequate diameter.
How do I change the grinding wheel on the ATQP30?
Use the provided wrench to loosen the spindle nut, then remove the wheel and replace it. Ensure the new wheel is rated for 25,000 RPM.
Can I use the ATQP30 for cutting metal?
Yes, by fitting a cut-off wheel of the correct size and speed rating, but always follow safety guidelines for cutting applications.
How often should I lubricate the ATQP30?
Add 2-3 drops of air tool oil through the air inlet before each shift or after every few hours of use to extend tool life.
What air hose size is recommended for the ATQP30?
A 3/8-inch inner diameter hose is recommended to minimize pressure drop at high flow.
Is the ATQP30 suitable for continuous use?
It can handle continuous light-to-medium duty, but allow the tool to cool down and lubricate regularly for heavy workloads.
What safety precautions should I take when using this grinder?
Always wear safety goggles, gloves, and a face shield. Never remove the wheel guard, and make sure the wheel is securely mounted.
Where can I find replacement parts for the ATQP30?
Authorized Mac Tools distributors and service centers carry genuine replacement parts such as wrenches, air fittings, and wheel guards.
Does the ATQP30 come with a warranty?
Refer to the included manual or contact Mac Tools for warranty information; typical warranties cover manufacturing defects for a specified period.
User questions about ATQP30 Mac Tools
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Angle Grinder in PDF format for free! Find your manual ATQP30 - Mac Tools and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ATQP30 by Mac Tools.
USER MANUAL ATQP30 Mac Tools
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Mac Tools
Model : ATQP30
Category : Angle Grinder